- 57 -
In the startup and shutdown module, there are the settings of the startup channel
and the startup plan. You can set default source when turned on, such as last source
before powered off, the Android channel, HDMI1, HDMI2, HDMI3, and VGA channels
supported by the whole machine. You can also set whether to enter standby (turn off
the backlight) after booting.
Set the default boot input source, optional Android, or
other external input source (HDMI/PC/USB-C). Runs as the
default input source set after system boot.
Standby After
Startup (Black
Screen)
The screen automatically turns black screen when every
time the interactive display is started and enters the home
screen.
For Android source, the screen is automatically turned
display off after startup
You can customize the boot logo and video to be displayed
while booting.
If no operations are performed within a specified time, the
system automatically enters standby mode.
The default value is set to 120 minutes.
If no operations are performed within a specified time, the
system automatically powers off.
To displays a confirmation message window pop-up when
performing system shutdown.
The default setting is enabled.
You can specify the date and time for a boot task.
You can specify the date and time for an off task.
Set the default boot input source, optional Android, or
other external input source (HDMI/PC/USB-C). Runs as the
default input source set after system boot.
6.5.11 Boot task
You can configure whether to pop up a shutdown reminder for shutdown, which is
used to pop up a reminder after the scheduled shutdown reaches the time and
perform a countdown. Users can add scheduled startup tasks and scheduled
shutdown tasks for the whole machine. For the startup task and shutdown task, the
user can also configure whether this task takes effect.
[Off task] setting is same procedure.
To Next Page
Loading...
