Extended functions
44
•
The camera will correct photos optically only when the light source is brighter
than uorescent light.
•
If your subject is moving rapidly, the photo may be blurry.
•
Set the Optical Image Stabilization option or Dual IS option to reduce camera
shake in dierent shooting modes. (p. 34)
Before correction
After correction
1
Rotate the mode dial to .
2
Align your subject in the frame, and then half-press [Shutter] to
focus.
3
Press [Shutter] to capture the photo.
Using the DUAL IS mode
Reduce camera shake and prevent blurred photos with Optical and Digital Image Stabilization functions.
To Next Page
Loading...
