Samsung WB200F - Using the Split Shot Mode

Using the Magic Plus mode
Extended functions 55
Using the Split Shot mode
In Split Shot mode, you can capture several photos and arrange them with
preset layouts.
1
Rotate the mode dial to .
2
Select .
• To select another mode when the mode dial is set to , press [ ] or touch
, and then select a mode.
3
Select a split style.
• To adjust the sharpness of the dividing line, press [ ], and then
select Line Blur → a value.
• To apply a Smart Filter eect to part of the shot, press [
], and then
select Smart Filter → an option. You can apply dierent Smart Filter eects
to each part of the shot.
• To adjust the size of the frame, drag the dividing line. Touch
or the split
style again to discard your changes.
OK : Panel o
4
Align your subject in the frame, and then half-press [Shutter] to
focus.
5
Press [Shutter] to capture a photo.
• Repeat steps 4 and 5 to capture the rest of the photos.
• To recapture a photo, press
[ ].
• The resolution is set to or smaller.
• The available zoom range may be less than in other shooting modes.