Settings menu
Settings
127
Connectivity
* Default
Item Description
Video Out
Set the video signal output for your region.
•
NTSC: USA, Canada, Japan, Korea, Taiwan, Mexico, etc
•
PAL (supports only BDGHI): Australia, Austria, Belgium, China,
Denmark, England, Finland, France, Germany, Italy, Kuwait,
Malaysia, Netherlands, New Zealand, Norway, Singapore, Spain,
Sweden, Switzerland, Thailand, etc
Anynet+
(HDMI-CEC)
Turn on to control the camera with a TV remote control when
you connect it to an HDTV that supports the Anynet+(CEC)
prole.
•
O: View les without using an HDTV remote control.
•
On*: Control the camera with an HDTV remote control.
HDMI Size
Set the resolution of photos when the camera plays back les on
an HDTV via the HDMI cable.
(NTSC: 1080i*, 720p, 480p/ PAL: 1080i*, 720p, 576p)
•
If the HDTV does not support the selected resolution, the
HDTV automatically selects the next lower resolution.
i-Launcher
Set i-Launcher to launch automatically when you connect your
camera to your computer. (O, On*)
* Default
Item Description
Display
Brightness
Adjust the brightness of the screen. (Auto*, Dark, Normal,
Bright)
Normal is xed in Playback mode even if you have selected
Auto.
Quick View
Set whether or not to review a captured image before returning
to the Shooting mode. (O, On*)
This feature does not work in some modes.
Auto Display
O
If you perform no operations for 30 seconds, the camera
automatically switches to Auto Display O mode. (O*, On)
In Auto Display O mode, press any button other than [X] to
resume using the camera.
To Next Page
Loading...
