Shooting options
83
Using burst modes
It can be dicult to capture photos of fast-moving subjects or capture natural facial expressions and gestures of your subjects in photos. Also, it can be dicult to adjust the
exposure correctly and select a proper light source. In these cases, select one of the burst modes. You can also set the timer to delay shooting.
pAhMsig
3
Align your subject in the frame, and then half-press [Shutter] to
focus.
4
Press and hold [Shutter].
•
While you are pressing [Shutter], the camera captures photos continuously.
•
Available options may dier depending on the shooting conditions.
•
Depending on the Face Detection options you selected, some shooting options
may not be available.
•
It may take longer to save the photos depending on the memory card capacity
and performance.
•
In some modes, you can also set the shooting option by pressing [
m
], and
then selecting Drive/Timer.
Capturing continuous photos
1
In Shooting mode, press [
t
].
2
Select an option.
Icon Description
Continuous (8 fps): Capture 8 photos per second continuously.
(You can capture up to 6 photos in one burst.)
Continuous (3 fps): Capture 3 photos per second continuously.
(You can capture up to 6 photos in one burst.)
Single: Capture a single photo. (Single is not a burst option.)
To Next Page
Loading...
Need help?
General
