Shooting options
55
Changing the camera’s focus
•
If you do not select a focus area, the focus frame will appear in the
center of the screen.
•
Tracking a subject may fail when:
- the subject is too small
- the subject moves excessively
- the subject is backlit or you are shooting in a dark place
- colors or patterns on the subject and the background are the same
- the subject includes horizontal patterns, such as blinds
- the camera shakes excessively
•
When tracking a subject fails, the focus frame will appear as a white
single-line frame ( ).
•
If the camera fails to track the subject, you must reselect the subject
to track.
•
If the camera fails to focus, the focus frame will change to a red
single-line frame ( ).
•
If you use this function, you cannot set Face Detection options, Drive
options, and Smart Filter effects.
Adjusting the focus area
In addition to Selection AF and Multi AF, you can also use the
Center AF and Multi-AF functions to change the focus area.
Choose the appropriate focus area function according to your
subject's location in the scene.
1
In Shooting mode, press [
m
].
2
Select
a
Focus Area.
3
Select an option.
Icon Description
Center AF: Focus on the center of the frame (suitable
when subjects are located at or near the center).
Multi AF: Focus on one or more of 9 possible areas.
Selection AF: Focus on the area that you select. (p. 54)
Tracking AF: Focus on and track the subject. (p. 54)
Available shooting options may differ depending on the shooting mode.
pAhMds
To Next Page
Loading...
Need help?
General
