Samsung WD0804W8E - Washing Clothes Using the Cycle Selector

30_ washing a load of laundry
Washingclothesusingthecycleselector
Yournewwashingmachinemakeswashingclotheseasy,usingSamsung’s“FuzzyControl”
automatic control system. When you select a wash program, the machine will set the correct
temperature, washing time, and washing speed.
1. Turn on your sink’s water tap.
2. Press the Power button.
3. Openthedoor.
4. Loadthearticlesoneatatimelooselyintothedrum,withoutoverllingit.
5. Closethedoor.
6. Adddetergent,softener,andpre-washdetergent(ifnecessary)intotheappropriate
compartments.
Pre-washisonlyavailablewhenselectingtheCotton,Synthetics,DailyWash,Babycare
cycles.Itisonlynecessaryifyourclothingisheavilysoiled.
7. Use the Cycle Selector to select the appropriate cycle according to the type of material:
Cotton,Synthetics,DailyWash,15’QuickWash,SuperEcoWash,OutdoorCare,BabyCare,
Wool, Hand Wash. The relevant indicators will illuminate on the control panel.
8. At this time, you can control the wash temperature, the amount of rinses, the spinning
speed, and the delay time by pressing the appropriate option button.
9. Press the Start/Pause button and the wash will begin. The process indicator will light up
and the remaining time for the cycle will appear in the display.
PauseOption
Within5minutesofstartingawash,itispossibletoadd/removelaundryitems.
1. Press the Start/Pause button to unlock the door.
ThedoorcannotbeopenedwhenthewateristooHOTorthewaterlevelistooHIGH.
2. After closing the door, press the Start/Pause button to restart the wash.
Whenthecycleisnished:
After the total cycle has finished, the power will turn off automatically.
1. Openthedoor.
2. Removelaundry.
washing a load of laundry
WD0804W8-02927U_EN(XEU)_removePF.indd 30 2011-7-9 11:58:58