Samsung WD10 K6 /X Series - Page 32

30 _Disassembly and Reassembly
Partname Description Figure
DD
MOTOR
6.Toremovethehallsensor,unfasten
thetwo(2)screwsholdingboththe
statorandhallsensorinplace.
7.Removethehallsensorbyexerting
someforcetothe▲ part.
√CheckPointsforTroubleshooting
● A“3E”erroroccurswhenthetubisdriveninawashorrinsecyclebut
thereisnoproblemwiththestator.
→Replacethehallsensor.
ROTOR
STATOR
HALL SENSOR REMOVED
WD6500K_7-8-9-11kg_1400rpm-SM.indb 30 2018/11/9 9:53:27