EasyManua.ls Logo

Samsung WD146UVHJSM - User Manual

Samsung WD146UVHJSM
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Washing Machine
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
WD146UVHJSM
WD136UVHJSM
WD146_WD136-03129E-04_EN.indd 1WD146_WD136-03129E-04_EN.indd 1 2016-04-07  10:11:482016-04-07  10:11:48

Questions and Answers

  • M
    Michael BrownAug 20, 2025
    Why is my Samsung WD146UVHJSM Washer not starting?
    • V
      vvillanuevaAug 20, 2025
      If your Samsung Washer won't start, ensure the door is firmly closed, the washer is plugged in, and the water source faucets are open. Press the Start/Pause button. Also, check if the Child Lock is activated. Before the washer starts to fill, it will make clicking noises to check the door lock and perform a quick drain. Finally, check the fuse or reset the circuit breaker.
  • D
    Dylan FloresAug 22, 2025
    What to do if my Samsung WD146UVHJSM leaks water?
    • C
      Christopher FloresAug 22, 2025
      If your Samsung Washer leaks water, make sure the door is firmly closed and all hose connections are tight. Ensure the drain hose is correctly inserted and secured to the drainage system. Avoid overloading the washer and use high-efficiency detergent to prevent over-sudsing.
  • G
    Gina CraigAug 25, 2025
    Why is my Samsung WD146UVHJSM door locked and will not open?
    • J
      James Rivers PhDAug 25, 2025
      If the door is locked or will not open on your Samsung Washer, press the Start/Pause Button to stop the washer. Note that the washer door will remain locked during the heating portion of the Sanitize Cycle. It may take a few moments for the door lock mechanism to disengage.
  • J
    Joshua TaylorAug 26, 2025
    Why is my Samsung Washer not draining or spinning?
    • L
      larsonjonathanAug 26, 2025
      If your Samsung Washer does not drain and/or spin, check the fuse or reset the circuit breaker. Straighten the drain hoses to eliminate any kinks. Close the door and press the Start/Pause Button. Also, make sure the debris filter is not clogged.
  • A
    Andrew TerryAug 28, 2025
    What to do if my Samsung Washer vibrates too much?
    • A
      alyssaparkAug 28, 2025
      If your Samsung Washer vibrates or is too noisy, make sure it is set on a level surface. Adjust the washer feet to level the appliance if needed. Ensure that the shipping bolts have been removed and that the washer is not touching any other object. Also, make sure the laundry load is balanced.
  • M
    mendozadillonAug 29, 2025
    Why does my Samsung WD146UVHJSM Washer stop mid-cycle?
    • K
      karanobleAug 30, 2025
      If your Samsung Washer stops, ensure the power cord is plugged into a live electrical outlet. Check the fuse or reset the circuit breaker. Close the door and press the Start/Pause Button. Before the washer starts to fill, it will make clicking noises to check the door lock and perform a quick drain. There may be a pause or soak period in the cycle, so wait briefly. Also, check the screens on the inlet hoses at the faucets for obstructions and clean them periodically.
  • D
    Deborah MurphySep 1, 2025
    What to do if my Samsung WD146UVHJSM load is too wet after washing?
    • F
      Franklin ThomasSep 1, 2025
      If the load is too wet at the end of the cycle in your Samsung Washer, use the High or Extra High spin speed. Using high-efficiency detergent can also reduce over-sudsing. Very small loads (one or two items) may become unbalanced and not spin out completely.
  • L
    lisarichardsonSep 2, 2025
    Why does my Samsung Washer have excessive suds?
    • M
      Melissa CollinsSep 3, 2025
      If your Samsung Washer has excessive suds, use high-efficiency detergent to prevent over-sudsing. Reduce the detergent amount for soft water, small loads, or lightly soiled loads. Non-HE detergent is not recommended.
  • R
    Rebecca KingSep 4, 2025
    Why does my Samsung Washer have no water or not enough water?
    • J
      Julia CraigSep 4, 2025
      If your Samsung Washer has no water or not enough water, turn both faucets on fully and ensure the door is tightly closed. Straighten the water inlet hoses. Disconnect the hoses and clean the screens, as they may be clogged. Open and close the door, then press the Start/Pause Button.
  • J
    Joel JohnsonSep 7, 2025
    What does 4E mean on my Samsung Washer?
    • S
      Sonya LongSep 7, 2025
      If your Samsung Washer displays a '4E' error, ensure the source water tap is turned on and check the water pressure.

Summary

SAFETY INFORMATION

What You Need to Know About Safety Instructions

Key safety instructions and guidelines for safe operation of the appliance.

Important Safety Symbols and Precautions

Explains the meaning of safety symbols and precautions to prevent hazards.

Severe Warning Signs for Installation

Critical warnings and precautions to be followed during the appliance installation process.

Severe Warning Signs for Using

Essential warnings for safe and proper usage of the appliance.

Severe Warning Signs for Cleaning

Critical warnings to observe when performing cleaning and maintenance.

SETTING UP YOUR WASHING MACHINE

Meeting Installation Requirements

Essential requirements for electrical supply, water, and site preparation.

WASHING A LOAD OF LAUNDRY

DETERGENT AND ADDITIVES INFORMATION

CLEANING AND MAINTAINING YOUR WASHING MACHINE

TROUBLESHOOTING AND INFORMATION CODES

Machine Not Starting or Filling Issues

Solutions for problems like failure to start or water supply issues.

Information Codes

Explains error codes displayed on the washing machine.

CYCLE CHART

Samsung WD146UVHJSM Specifications

General IconGeneral
Washer TypeFront Load
Washing Capacity14 kg
Drying Capacity8 kg
Capacity14 kg
Energy RatingA+++
Spin Speed1400 RPM
ColorSilver
Inverter MotorYes
Digital Inverter TechnologyYes
Eco Bubble TechnologyYes
AddWash DoorYes
Dimensions (HxWxD)850 x 600 x 600 mm

Related product manuals