English
Operations
English42
Additional Functions
Using Additional Functions
1. Tap .
2. Turn the Navigation dial to select the desired additional function.
3. Tap
to change the selected function’s settings or start the function.
NOTE
• To return to the main screen, tap
again or turn the Navigation dial to select Back and tap .
• If the selected function is not supported, the “Currently not supported” message is displayed, and the
button is not activated.
• When you select an additional function, a brief help message appears for the first ten times of use.
Dry
You can add a drying process at the end of a wash cycle.
1. Select a cycle and change the cycle settings as necessary.
2. Tap
.
3. Turn the Navigation dial to select Dry, and then tap
.
4. Turn the Navigation dial or tap
repeatedly to select the desired drying time.
- You can select from Off, Auto, 00:30, 01:00, 01:30, 02:00, 03:00min, or 04:00.
5. Tap and hold
.
Quick Drive (WD**T7***** models only)
You can reduce the overall washing time of the selected cycle settings.
Quick Drive may not be available for certain cycles.
1. Select a cycle and change the cycle settings as necessary.
2. Tap
.
3. Turn the Navigation dial to select Quick Drive, and then tap
.
4. Tap and hold
.
Prewash
You can add a preliminary washing cycle before the main wash cycle.
1. Select a cycle and change the cycle settings as necessary.
2. Tap
.
3. Turn the Navigation dial to select Prewash, and then tap
.
4. Tap and hold
.
U-PJT_COMBO-MD_SimpleUX_DC68-04269L-00_EN.indd 42 2021/6/30 9:07:11
To Next Page
Loading...
