Washing for the first time
Before washing clothes for the first time, you must run a
complete cycle without clothes.
To do this:
1. Press the Power button.
2. Pour a little detergent into compartment ( )in the
detergent drawer.
3. Turn on the water supply to the washing machine.
4. Press the Start/Pause button.
This will remove any water from the manufacturer’s
test run remaining in the machine.
Dispenser (
) : Detergent for prewash or starch.
Dispenser ( ) : Detergent for main wash, water softener, presoaking agent, bleach and stain removal
product.
Dispenser ( ) : Additives.e.g.fabric softener or former (fill no higher than lower edge of insert “ A”)
Putting detergent in the washing machine
1. Pull out the detergent drawer.
2. Add laundry detergent into compartment ( ).
3. Add softener into compartment ( ) (if you desire).
4. Add prewash detergent into compartment ( ) (if you desire).
Caution :
Concentrated or thick fabric softener and conditioner must
be diluted with a little water before being poured into the
dispenser (prevents the overflow from becoming blocked.)
Washing a Load of Laundry
To Next Page
Loading...
