Samsung WD80J5 - Page 55

English 55
Specications
Problem Action
1C
The WaterLevel sensor is not working properly.
• Try power off and restarting the cycle.
• Check WaterLevel Sensor wire harness.
• If the information code remains, contact a customer service
centre.
NOTE
When the washer displays the “1C” code, the washer do
draining for 3 minutes. During this time, the Power button is
inoperative.
AC
Check communications between main and sub PBAs.
• Try power off and restarting the cycle.
• If the information code remains, contact a customer service
centre.
If any information code keeps appearing on the screen, contact a local Samsung service
centre.
WD80J5430AW_03588L-05_EN.indd 55 2015/12/18 14:43:52