English 25
Installation
CAUTION
Do not stretch the water hose by force. If the hose is too short, replace the hose with a
longer, high-pressure hose.
Connecting to a non-threaded water tap
A
B
1. Remove the adaptor (A) from the water
hose (B).
2. Use a Phillips screwdriver to loosen four
screws on the adaptor.
3. Hold the adaptor and turn part (C) in the
arrow direction to loosen it by 5 mm (*).
WD95T4046CE_04215J-00_EN.indd 25 2021/3/4 9:39:09
To Next Page
Loading...
