What to do if Samsung WD90J6 Washer shows Water is not supplied (4C code)?
If your Samsung washer displays a 4C code, signaling that water is not being supplied, ensure that the water taps are fully open. Check that the water hoses are not clogged. Also, make sure that the washing machine is operating with sufficient water pressure.
What to do if Samsung WD90J6 Washer stops?
If your Samsung washer stops unexpectedly, ensure that the power cord is plugged into a working electrical outlet. Close the door and press Start/Pause to restart the washing machine. Check the mesh filter of the water supply hose at the water taps to make sure they are not clogged. If the washing machine does not have sufficient power, it will temporarily not drain or spin.
Why Samsung WD90J6 Washer has excessive suds?
If your Samsung washer is producing too many suds, ensure that the Auto Detergent and Auto Softener settings are properly configured. Use the recommended types of detergent as appropriate. Use high efficiency (HE) detergent to prevent excessive suds. Reduce the amount of detergent used for soft water, small loads, or lightly soiled loads.
Why Samsung WD90J6 door does not open?
If the door of your Samsung washer won't open, first, press Start/Pause to stop the washing machine. Make sure all the water in the drum has been drained. Check that the door lock light is off.
What to do if Samsung WD90J6 Washer water supply is insufficient, or no water is supplied?
If your Samsung washer isn't getting enough water, or no water at all, take these steps: Fully open the water tap. Ensure the door is properly closed. Check that the water supply hose isn't frozen, kinked, or clogged. Also, confirm that there is sufficient water pressure available.
Why is my Samsung WD90J6 Washer leaking water?
If your Samsung washer is leaking water, first, ensure that the door is properly closed. Next, check that all hose connections are tightened securely. Finally, verify that the end of the drain hose is correctly inserted and securely attached to the drain system.
What to do if Samsung Washer does not drain and/or spin?
If your Samsung washer isn't draining or spinning, ensure the drain hose is fully straightened towards the drain system. Check the debris filter for any clogs. Close the door and press Start/Pause. Also, verify that the drain hose isn't frozen or clogged, and that it's connected to a drain system that isn't blocked.
General| Washing Capacity | 9 kg |
|---|---|
| Drying Capacity | 6 kg |
| Spin Speed | 1400 RPM |
| Noise Level (Spinning) | 74 dB |
| Color | White |
| Type | Washer Dryer |
| Dimensions (H x W x D) | 85 x 60 x 60 cm |
| Technology | Ecobubble |
Understand essential safety guidelines for safe operation and maintenance.
Follow basic precautions to reduce risks of fire, electric shock, or injury.
Essential warnings regarding safe and proper installation procedures.
Vital warnings to follow during the operation of the washing machine.
Details electrical, water supply, and drain requirements for proper installation.
Provides a guide for the complete process of installing the washing machine.
A quick guide to starting a wash cycle with the washing machine.
A guide to common problems and their recommended actions.
Explanation of error codes displayed by the washing machine.
To Next Page