4. Test Mode & Error Check
4-2. Diagnostic Code & Corrective Action
NO
Error
Code
Description Corrective Action
7 OE
A fault is detected in the water level sensor. Data
(frequency) shows the water level is at or above the
overflow water level. (When this condition is
detected, the machine will automatically starts
draining water until the water level falls below the
reset water level)
First check to see that all of water valves are not
stuck. If water valves are OK, check water level.
8 dc
Unbalance or cabinet bump is detected during final
spin, which prevents the drum from spinning over 150
rpm. (Never exceeds 150 RPM due to unbalanced
load)
Go to “Wet Clothes” Troubleshooting Section.
9 E2
Jammed Key.(When key input signals are coming
out for more than 30 seconds, it is regarded as a
jam.)
Check all of keys. If A key is sensed to be pressed,
all keys will do not respond.
41
To Next Page
Loading...
