M
Megan BarnesSep 23, 2025
What to do if Samsung Washer has motor problem?
- JJonathan BryanSep 23, 2025
Restart the cycle. If the code reappears, call for service.
To Next PageTo Next PageWhat to do if Samsung Washer has motor problem?
Restart the cycle. If the code reappears, call for service.
How to stop a Samsung Washer from leaking water?
If your Samsung Washer leaks water, make sure the door is firmly closed and all hose connections are tight. Ensure the drain hose is correctly inserted and secured to the drainage system. Avoid overloading the washer and use high-efficiency detergent to prevent excessive suds.
Why Samsung WF395BTPAWR/A1 Washer does not drain and/or spin?
If your Samsung Washer does not drain and/or spin, check the fuse or reset the circuit breaker. Straighten the drain hoses to eliminate any kinks. Close the door and press the Start/Pause Button. Ensure the debris filter is not clogged.
What to do if Samsung WF395BTPAWR/A1 Washer door is locked or will not open?
If the door on your Samsung Washer is locked or will not open, press the Start/Pause Button to stop the washer. Note that the door will remain locked during the heating portion of the Sanitize Cycle, and it may take a few moments for the door lock mechanism to disengage.
How to fix Samsung WF395BTPAWR/A1 unbalanced load prevented spinning?
If an unbalanced load prevented your Samsung Washer from spinning, redistribute the load and press the Start/Pause button.
What to do if Samsung WF395BTPAWR/A1 Washer door is open when running?
Close the door tightly and restart the cycle. If the code reappears, call for service.
Why does my Samsung WF395BTPAWR/A1 Washer have an odor?
If your Samsung Washer has an odor, it may be due to excessive suds collecting in nooks and crannies. Run cleansing cycles to sanitize the machine periodically (Silver Care, Sanitize Cycle, or Pure Cycle). Clean the door seal (Diaphragm) and dry the interior of your washer after each cycle.
How to fix Samsung WF395BTPAWR/A1 water temperature error in Wool and Delicate course?
If your Samsung Washer shows this error code, ensure the hot and cold water hoses are connected correctly.
Why is my Samsung WF395BTPAWR/A1 load too wet after cycle?
If the load in your Samsung Washer is too wet at the end of the cycle, use the High or Extra High spin speed. Also, use high-efficiency detergent to reduce over-sudsing. Note that very small loads (one or two items) may become unbalanced and not spin out completely.
Why does my Samsung WF395BTPAWR/A1 Washer keep stopping?
If your Samsung Washer stops mid-cycle, ensure the power cord is plugged into a live electrical outlet. Check the fuse or reset the circuit breaker. Close the door and press the Start/Pause Button. Remember that the washer makes clicking noises to check the door lock and do a quick drain before filling. There may also be a pause or soak period in the cycle. Check the screens on the inlet hoses for obstructions and clean them if necessary.
General| Brand | Samsung |
|---|---|
| Model | WF395BTPAWR/A1 |
| Type | Front Load Washer |
| Capacity | 4.5 cu. ft. |
| Color | White |
| Energy Star Certified | Yes |
| Maximum Spin Speed | 1300 RPM |
| Steam Function | Yes |
| VRT Technology | Yes |
Explains safety icons and provides essential precautions for safe operation.
Covers critical safety measures for installation, operation, and cleaning.
Unpacking, component overview, electrical, grounding, water, drain, and location setup.
Guides through pedestal/stacking options, installation steps, and calibration mode.
Explanation and solutions for various error codes displayed on the washer.
