To Next PageTo Next PageWhy does my Samsung WF395BTPAWR/A1 have detergent remains in the dispenser?
If detergent remains in the automatic dispenser of your Samsung Washer after the wash cycle, ensure the washer is running with sufficient water pressure. Also, make sure the Detergent Selector dial is in the upper position when using granular detergent.
How to fix a Samsung WF395BTPAWR/A1 that will not start?
If your Samsung Washer won't start, ensure the door is firmly closed, the washer is plugged in, and the water source faucets are open. Press the Start/Pause button and verify the Child Lock is not activated. Note that the washer makes clicking noises to check the door lock and do a quick drain before filling. Also, check the fuse or reset the circuit breaker.
Why does my Samsung WF395BTPAWR/A1 Washer have excessive suds?
If your Samsung Washer has excessive suds, use high-efficiency detergent to prevent over-sudsing. Reduce the detergent amount for soft water, small, or lightly soiled loads. It is not recommended to use non-HE detergent.
Why does my Samsung WF395BTPAWR/A1 Washer keep stopping?
If your Samsung Washer stops mid-cycle, ensure the power cord is plugged into a live electrical outlet. Check the fuse or reset the circuit breaker. Close the door and press the Start/Pause Button. Remember that the washer makes clicking noises to check the door lock and do a quick drain before filling. There may also be a pause or soak period in the cycle. Check the screens on the inlet hoses for obstructions and clean them if necessary.
Why is my Samsung WF395BTPAWR/A1 vibrating or too noisy?
If your Samsung Washer vibrates excessively or is too noisy: * Ensure it is on a level surface; adjust the feet if necessary. * Confirm that the shipping bolts have been removed. * Ensure the washer isn't touching any other objects. * Make sure the laundry load is balanced.
What to do if Samsung WF395BTPAWR/A1 Washer has no water or not enough water?
If your Samsung Washer has no water or not enough water: * Ensure both faucets are fully on. * Make sure the door is tightly closed. * Straighten the water inlet hoses. * Disconnect the hoses and clean the screens, as they may be clogged. * Try opening and closing the door, then press the Start/Pause Button.
What to do if Samsung WF395BTPAWR/A1 Washer is not draining?
Clean the drain filter. Then, clean the debris filter. If you are in the middle of a wash you can try this first: 1. Turn off the unit for 10 seconds and then turn it on again. 2. Select the Spin Only cycle. 3. Press the Start/Pause to drain the water. If it still does not drain, call for service.
What to do if Samsung WF395BTPAWR/A1 door will not unlock?
Make sure the door is firmly closed. Press the Power button to turn off your washer, then turn it on again. If the code reappears, call for service.
How to fix Samsung WF395BTPAWR/A1 unbalanced load prevented spinning?
If an unbalanced load prevented your Samsung Washer from spinning, redistribute the load and press the Start/Pause button.
What to do if Samsung WF395BTPAWR/A1 Washer door is locked or will not open?
If the door on your Samsung Washer is locked or will not open, press the Start/Pause Button to stop the washer. Note that the door will remain locked during the heating portion of the Sanitize Cycle, and it may take a few moments for the door lock mechanism to disengage.
General| Brand | Samsung |
|---|---|
| Model | WF395BTPAWR/A1 |
| Type | Front Load Washer |
| Capacity | 4.5 cu. ft. |
| Color | White |
| Energy Star Certified | Yes |
| Maximum Spin Speed | 1300 RPM |
| Steam Function | Yes |
| VRT Technology | Yes |
Explains safety icons and provides essential precautions for safe operation.
Covers critical safety measures for installation, operation, and cleaning.
Unpacking, component overview, electrical, grounding, water, drain, and location setup.
Guides through pedestal/stacking options, installation steps, and calibration mode.
Explanation and solutions for various error codes displayed on the washer.
