Samsung WF42H5100A - Basic Location Requirements

ALIGNMENT AND ADJUSTMENTS
12
Board Input Test Mode
Denition of Board Input Test Mode:
- BoardInputTestModeistodisplaysaspeciedInputafterakeypress.
How to Enter:
- ToentertheBoardInputTestMode,presstheDelayEndkeyDuringServiceMode.
Board Input Test Mode:
- IftheproductentersBoardInputTestMode,‘in’isdisplayed.
- TheinformationthatisdisplayedintheBoardInputTestisasfollows.
1. TheWaterTemperatureinCelsius.
2. TheWaterTemperatureinFahrenheit.
3.Thedoorstatus(OPifopen,CLifclosed).
4.TheDoorLockSwitchstatus(ULifunlocked,LOiflocked).
5.TheWaterLevelPulse
- YoucanchangeeachinformationusingtheCycleSelectorbutton.
Toavoidriskofelectricalshock,personalinjuryordeath;disconnectpowertowasher
beforeservicing,unlesstestingrequirespower.
WARNING
Extra Rinse
Service Mode Board Input Test
(Techsheet)WF42H5-03387A_EN.indd 12 2013-12-24 17:12:48