English _23
Sound
The Sound O function can be selected during all courses.
Smart Care
This function enables you to check the status of the washing
machine using a smartphone.
1. To enable the Smart Care function
1) WF42H5200A* and WF42H5000A* model
press and hold the Sound button for 3 seconds within 10
seconds after turning the power on by pressing the Power
button.
2) WF42H5100A* and WF42H5000A* model
Press Smart Care button to use.
2. If the Smart Care function is activated, the LED on the
window display rotates for 2 or 3 seconds and then the
Smart Care indicator is lit on the display.
3. Run the Smart Care app on your smart phone.
4.
The Smart Care function is optimized with Galaxy and iPhone
Series.
5. Focus your smart phone’s camera on the display panel of
the washing machine.
6. If the smart phone’s camera is focused on the display panel of the washing machine,
the panel and error message is automatically recognized and the error type and
countermeasures are displayed on the smart phone.
7. If the smartphone fails to recognize the error code more than twice, please enter the error
code displayed on the display panel of the washer manually into the Smart Care app.
Downloading the Smart Care app
• DownloadtheSamsungLaundryAppintoyourmobilephonefromtheAndroidmarket
or Apple App store. (Search word : Samsung Smart Washer/Dryer)
Precautions when using Smart Care
• Ifalightingdevice(e.g.uorescentorlamp)isreectedonthedisplaypanelofthe
washing machine, the result on the display panel may not be recognized easily.
• Ifanerroroccursmorethantwice,pleasemanuallyentertheerrorcodedisplayedonthe
display panel of the washing machine into the Smart Care app.
• Iftheangleofthesmartphonecameraandthedisplaypanelofthewashingmachineis
incorrect, the error may not be recognized properly.
Please try to hold the smart phone at an angle to the display panel as shown by the
figure.
To Next Page
Loading...
Need help?
General