Samsung WF50K7500A Series

Questions and Answers

D
Danielle SmithAug 31, 2025
Why is my laundry still wet after a Samsung WF50K7500A Washer cycle?
- H
  hcoleAug 31, 2025
  If your laundry is still wet after a Samsung Washer cycle, use the High or Extra High spin speed and high-efficiency (HE) detergent to reduce oversudsing. Small loads may become unbalanced and not spin completely. Ensure the drain hose is not kinked or clogged.
A
adamsgeraldSep 10, 2025
Why is my Samsung Washer filling with the wrong water temperature?
- J
  jonesjoshuaSep 10, 2025
  If your Samsung Washer is filling with the wrong water temperature, fully open both taps. Make sure the temperature selection is correct and the hoses are connected to the correct taps. Flush the water lines and ensure your water heater is set to a minimum of 120 °F (49 °C). Clean the mesh filter. The water temperature may change as the automatic temperature control checks the incoming water temperature, and you may notice just hot or cold water going through the dispenser when cold or warm temperatures are selected.
L
Larry BatesAug 30, 2025
Why is my Samsung Washer producing excessive suds?
- L
  Luis MorseAug 30, 2025
  Excessive suds in your Samsung Washer can be due to using the wrong type of detergent. Use high-efficiency (HE) detergent to prevent oversudsing. Reduce the detergent amount for soft water, small loads, or lightly soiled loads. Non-HE detergent is not recommended.
C
Carol LewisSep 12, 2025
Why can't I find the Samsung Smart Home app?
- K
  Kelly NewmanSep 12, 2025
  The Samsung Smart Home app is available for smartphones that run Android 4.0 (ICS) or higher, or iOS 7.0 or higher.
W
Whitney EwingSep 12, 2025
Why are no bubbles seen in my Samsung Bubbleshot Washer?
- S
  Steven PearsonSep 12, 2025
  If you don't see bubbles in your Samsung Washer (Bubbleshot model), overloading may screen bubbles, or severely contaminated laundry may not generate bubbles.
P
Paul LeeSep 15, 2025
How do I check for water leaks in my Samsung WF50K7500A?
- D
  Dakota JacksonSep 16, 2025
  Power your Samsung Washer off, and then check the drain system for any leaks. Once the leak issue is resolved, power the washer on after 2-3 minutes. Depending on the model, the drain system drains water automatically and the POWER and START/PAUSE buttons may be disabled during this process.
G
Gregory SmithSep 23, 2025
What to do if my Samsung WF50K7500A displays 'The Add Door is open'?
- B
  Brandon FlowersSep 23, 2025
  If your Samsung Washer displays 'The Add Door is open', close the Add Door and press START/PAUSE to resume operation.
M
Michael LeeAug 27, 2025
How to reduce excessive suds in my Samsung WF50K7500A Washer?
- P
  pamelamccartyAug 27, 2025
  Excessive suds in your Samsung Washer can be resolved by using the recommended type of detergent, which is high efficiency (HE) detergent. Reduce the amount of detergent for soft water, small loads, or lightly soiled loads. Non-HE detergent is not recommended.
A
Allison BrockAug 26, 2025
Why is no water being supplied to my Samsung WF50K7500A?
- D
  Debbie SimonAug 26, 2025
  If your Samsung Washer has insufficient or no water supply, fully open the faucet and ensure the door is properly closed. Check that the water supply hose isn’t frozen, kinked, or clogged. Also, ensure there is sufficient water pressure.
I
Ian BurtonAug 25, 2025
Why is my Samsung WF50K7500A leaking water?
- R
  Richard QuinnAug 26, 2025
  If your Samsung Washer is leaking water, ensure the door is properly closed and all hose connections are tight. Verify the drain hose is correctly inserted and secured. Avoid overloading the washer and use high-efficiency (HE) detergent to prevent excessive suds.