Samsung WM75A - Sharing Your Screen

46
Sharing your screen
EXPORT→SCREEN SHARE
SCREEN SHARE
Wired Wireless
EXPORT
EMAIL PRINT USB MOBILENETWORK DRIVE
SCREEN SHARE
Share your screen with selected devices.
Connecting with HDMI cables
3
Use an HDMI cable to connect the SCREEN SHARE port to the external display.
4
From the top of the screen, select EXPORT→SCREEN SHARE→Wired.
"
If the PC is connected to the HDMI 2 port on a tray without setting it, the PC screen is
shared on the display instead.
5
The screen is shared on the display.
"
This option supports UHD (50 Hz / 60 Hz) and FHD (50 Hz / 60 Hz) only.
"
Some devices may not support 50 Hz depending on the connected external display.
"
The screen may blink once or twice upon when connecting for the first time or when there is
a change in the WMA product or source state.
"
When any device does not work, change the screen resolution for SCREEN SHARE. (
¬
→
SETTINGS→Picture→Screen Share(Wired) Resolution)
"
If the UHD or FHD1 output is not available for the external device due to compatibility, set
Screen Share (wired) Resolution to FHD2.
"
SCREEN SHARE connecting with HDMI cables is optimized for direct connection with
Samsung display product.
Connecting wirelessly
From the top of the screen, select EXPORT→SCREEN SHARE→Wireless and then the device to
share the screen with.
"
SCREEN SHARE feature works best when using FLIP in landscape orientation.
"
Devices must support receiving Screen Mirroring to project the shared screen using
SCREEN SHARE.
Buttons Description
Change Device Change devices to share the screen with.
Disconnect Stop sharing.