What does 'LC, LC1' error mean on my Samsung WW1 CB Washer?
If your Samsung Washer displays the error code 'LC' or 'LC1', make sure the end of the drain hose is not placed on the floor and that the drain hose is not clogged.
What to do if my Samsung WW1 CB Washer does not drain and/ or spin?
If your Samsung washer isn't draining or spinning, try the following: * Ensure the drain hose is straightened all the way to the drain system and is not frozen or clogged. * Make sure the debris filter is not clogged; clean it if necessary. * Confirm the drain hose is connected to a drain system that is not clogged and is positioned correctly. * Close the door and tap and hold to start.
Why is my Samsung WW1 CB Washer leaking water?
If your Samsung washer is leaking water, check the following: * Ensure the door is properly closed. * Make sure all hose connections are tight. * Verify the end of the drain hose is correctly inserted and secured to the drain system. * Avoid overloading the machine. * Use high efficiency (HE) detergent to prevent oversudsing. * Check the drain hose for any issues.
What to do if my Samsung WW1 CB Washer door does not open?
If the door of your Samsung washer won't open, try the following steps: * Tap and hold to stop the washing machine. * Allow a few moments for the door lock mechanism to disengage; the door will not open until 3 minutes after the washing machine has stopped or the power has been off. * Ensure all the water in the drum is drained. If not, drain the drum and try opening the door manually. * Make sure the door lock light is off.
Why won't my Samsung WW1 CB supply water or has insufficient water supply?
If your Samsung Washer has insufficient or no water supply, check these items: * Fully open the water tap. * Make sure the door is properly closed. * Ensure the water supply hose is not frozen, kinked, or clogged. * Make sure there is sufficient water pressure. * Confirm that the cold and hot water taps are properly connected. * Clean the mesh filter, as it may be clogged.
Why does my Samsung WW1 CB have an increased time of washing?
The actual washing time may differ from the estimated time initially displayed on the control panel upon cycle selection on your Samsung Washer.
Why are no bubbles seen in my Samsung WW1 CB (Bubble models only)?
If you don't see bubbles in your Samsung Washer (Bubble models only), it may be due to too many items in the drum or severely contaminated laundry.
What does it mean when a message appears on the display to alert that dispenser is open on my Samsung WW1 CB Washer?
If a message appears on the display of your Samsung Washer alerting that the dispenser is open, check if the detergent drawer is closed properly.
Why does detergent remain in the detergent drawer of my Samsung Washer after a cycle?
If detergent remains in the drawer of your Samsung washer after a cycle, ensure the washing machine is running with sufficient water pressure. Also, make sure the detergent is added to the centre of the detergent drawer, and that the rinse cap is inserted properly. If using granular detergent, ensure the detergent selector is in the upper position. You may also remove the rinse cap and clean the detergent drawer.
What to do if my Samsung WW1 CB Washer load is wet at the end of a cycle?
If your laundry load is still wet after a cycle, try these solutions: * Use the High or Extra High spin speed. * Use high efficiency (HE) detergent to reduce oversudsing. * Ensure the drain hose is not kinked or clogged.
General| Noise Level (Spinning) | 74 dB |
|---|---|
| Color | White |
| Digital Inverter Motor | Yes |
| Eco Bubble Technology | Yes |
| Quick Wash | Yes |
| Delay Start | Yes |
| Child Lock | Yes |
| Capacity | 9 kg |
| Spin Speed | 1400 rpm |
| Dimensions (HxWxD) | 850 x 600 x 550 mm |
To Next Page