English 51
Maintenance
Keep the washing machine clean to prevent deteriorated performance and to preserve its life cycle.
Drum Clean+/Drum Clean
Perform this cycle regularly to clean the drum by removing bacteria from it. This cycle heats the water
between 60 °C and 70 °C, and it also removes accumulated dirt from the rubber door gasket.
1. Tap .
2. Turn the Navigation dial to select Drum Clean+/Drum Clean.
3. Tap and hold .
CAUTION
• Do not use any cleaning agents for cleaning the drum. Chemical residue in the drum may cause damage
to the laundry or the drum of the washing machine.
• To prevent limescale, add the proper amount of detergent according to your local water hardness or add
a water softener additive together with the detergent.
Drum Clean+/Drum Clean reminder
An alert message appears on the control panel display when it is time to run the Drum Clean+/Drum Clean
cycle.
• The Drum Clean+/Drum Clean reminder blinks on the control panel once every 40 washes. It is
advisable to perform Drum Clean+/Drum Clean regularly.
• When you first see this reminder blinking, you can ignore the reminder for 6 consecutive washes. From
the 7
th
wash, the reminder no longer appears. However, it appears again on the second 40
th
wash.
• Even after the last process is terminated, the "Drum Clean complete" message may remain.
• Even if "Drum Clean complete" does not disappear, the machine operates normally.
• It is recommended to run the cycle regularly for hygienic purposes.
Untitled-1 51 2023-09-26 11:02:47
To Next Page
Loading...
