To Next PageTo Next PageWhy does my Samsung WW10T684DLH Washer show an unbalance error?
The unbalance error on your Samsung Washer is caused by the laundry load. Check the laundry to resolve this issue, as this occurs by laundry.
Why is there no water supply in my Samsung WW10T684DLH Washer?
If your Samsung Washer isn't getting water, it could be due to several reasons. Foreign material may be entering the water supply valve, or the water supply valve terminal might not be connected properly. The warm water and rinse connectors could be wrongly connected. Also, check if the PCB terminal from the drain hose to the detergent drawer is not connected, or if the transparent hose is folded or torn. Low water pressure, or a frozen water valve in winter, can also cause this issue. In this case, the water supply valve may be faulty.
Why does my Samsung Washer overflow?
Your Samsung Washer may be overflowing due to a few potential issues. It could be that water is supplied continually because the water level detection isn't working, possibly due to a clogged drain hose or an injection error. Freezing or foreign material in the water supply valve can also cause continuous water supply. A faulty sensor, or a blocked or damaged pressure tube might also be responsible. All these scenarios can be related to a water level sensor fault.
Why is the water level wrong in my Samsung Washer?
If the water level in your Samsung Washer is incorrect, it could be due to several reasons. The hose where the water level sensor is located might be damaged, clogged with foreign material, or folded. Too much lubricant on the air hose insertion part, a hose engagement error, a part fault (like faulty internal soldering), a disengaged water level sensor terminal, or a main PBA fault can also cause this. These issues point to a water level sensor fault.
Why is my Samsung WW10T684DLH heater not working?
If the heater in your Samsung Washer isn't working, it could be due to a short-circuited washing heater or a disconnected wire. There might be a contact error or temperature sensor fault in the washing heater inside the tub. Also, if the water level sensor operates without water (due to frozen water or another reason) and the temperature sensor detects a high temperature (100 to 150 ?C), the washing machine will turn off the input power. This suggests a heater fault.
What causes communication errors in a Samsung Washer?
Communication errors in your Samsung Washer can occur if the signals between the sub and main PBAs are not sensed. Check the connector connections between the sub and main PBAs carefully and look for any faulty soldering after removing the sub PBA C/Panel. These issues may indicate a Main PCB and Sub PCB Signal Detection fault or a Main PCB and Sub PCB wire connection fault.
General safety guidelines for operating and servicing the washing machine, including warnings and cautions.
Technical details such as dimensions, capacity, power consumption, and spin speeds for various models.
Side-by-side comparison of key features and specifications across different washing machine models.
Details on optional parts and accessories, including part codes and descriptions.
Lists necessary tools such as box drivers, spanners, and vice pliers for servicing procedures.
Step-by-step visual guides for disassembling various components like the cover top, drawer, and panel.
Detailed explanation of error codes, their potential causes, and recommended corrective actions.
A guide to common washing machine problems and their simple solutions for quick diagnosis.
Provides a basic schematic illustrating the electrical connections within the washing machine.
Wiring schematic specific to washing machine models featuring LED displays.
Wiring schematic tailored for washing machines equipped with the Q-Drive system.
Explanation of the project name and model code structure, including capacity and features.
Glossary defining key technical terms used throughout the service manual.
General| Rim color | Black |
|---|---|
| Door color | Black, Transparent |
| Door hinge | Left |
| Control type | Rotary, Touch |
| Door opening | Side opening |
| Loading type | Front-load |
| Product color | White |
| Built-in display | Yes |
| Appliance placement | Freestanding |
| Drum capacity | 10.5 kg |
| Cycle time (max) | 240 min |
| Spin-drying class | B |
| Maximum spin speed | 1400 RPM |
| Noise level (spin) | 72 dB |
| Noise level (wash) | - dB |
| Delayed start timer | - |
| Number of washing programs | 25 |
| Energy efficiency scale | A to G |
| Power consumption (off) | 0.5 W |
| Water consumption per cycle | 53 L |
| Energy consumption washing per cycle | 0.523 kWh |
| Package depth | 697 mm |
| Package width | 666 mm |
| Package height | 890 mm |
| Package weight | 78000 g |
Weight and Dimensions| Width | 600 mm |
|---|---|
| Height | 850 mm |
| Weight | 76000 g |
