Samsung WW11BB904AGBS2 User Manual (English)

Questions and Answers:

T
Tiffany WebsterSep 3, 2025
Why Samsung Washer has excessive vibrations or makes noise?
- D
  Daniel LarsonSep 3, 2025
  Excessive vibrations or noise in your Samsung washer can be due to several factors. Ensure the washing machine is installed on a level, solid, and non-slippery floor. If the floor isn't level, adjust the height using the leveling feet. Make sure the shipping bolts have been removed and that the washing machine isn't touching any other object. Also, ensure the laundry load is balanced and redistribute if necessary. Keep in mind that the motor can cause noise during normal operation. Remove any metal objects such as coins from the laundry. Overalls or clothes with metallic decorations can also cause noise while being washed.
D
Debra BarnettAug 25, 2025
What to do if Samsung Washer does not drain and/ or spin?
- J
  Johnny AcevedoAug 25, 2025
  If your Samsung washer isn't draining or spinning, make sure the drain hose is straightened, not frozen or clogged, and connected to a drain system that isn't clogged. Also, check the debris filter for clogs and clean it if necessary. Ensure the door is closed and the machine has sufficient power. The drain hose should also be positioned correctly based on the connection type.
G
gburkeAug 25, 2025
What to do if Samsung WW11BB904AGBS2 leaks water?
- D
  Daniel BryantAug 26, 2025
  If your Samsung washer is leaking water, ensure the door is properly closed and all hose connections are tight. Verify the drain hose is correctly inserted and secured to the drain system, and that it's not placed on the floor or clogged. Avoid overloading the machine and use high-efficiency (HE) detergent to prevent excessive suds. Check the drain hose itself for damage and inspect for anything stuck between the door and the diaphragm.
J
Jane JonesSep 10, 2025
What to do if Samsung Washer stops?
- H
  Hannah RaySep 10, 2025
  If your Samsung washer stops: * Plug the power cord into a live electrical outlet. * Check the fuse or reset the circuit breaker. * Close the door, and press and hold to start the washing machine. For your safety, the washing machine will not tumble or spin unless the door is closed. * There may be a pause or soak period in the cycle. Wait briefly, and the washing machine may start. * Make sure the mesh filter of the water supply hose at the water taps is not clogged. Periodically clean the mesh filter. * If the washing machine is not supplied with sufficient power, the washing machine will temporarily not drain or spin. As soon as the washing machine regains sufficient power, it will operate normally.
E
Erica MccarthySep 3, 2025
Why Samsung WW11BB904AGBS2 load is wet at the end of a cycle?
- H
  harrisjohnSep 3, 2025
  If your Samsung washer leaves the load wet after a cycle, try using the High or Extra High spin speed. Make sure you are using high-efficiency (HE) detergent to reduce oversudsing. Also, check if the load is too small or if the drain hose is kinked or clogged.
L
leah08Sep 6, 2025
Why Samsung WW11BB904AGBS2 Washer water supply is insufficient?
- J
  Julie CollinsSep 6, 2025
  If your Samsung Washer isn't getting enough water or no water at all, fully open the water tap. Ensure the door is properly closed. Check that the water supply hose isn't frozen, kinked, or clogged. Also, ensure there is sufficient water pressure.
A
Anita EvansAug 31, 2025
Why won't my Samsung WW11BB904AGBS2 start?
- D
  Dale DunnAug 31, 2025
  If your Samsung washer isn't starting, here are a few things to check: * Ensure the washing machine is plugged in. * Make sure the door is properly closed. * Verify the water taps are open. * Tap and hold to start the washing machine. * Confirm Child Lock is not activated. * Check the fuse or reset the circuit breaker. * Ensure power is supplied properly. * Check if the power cord is plugged in, as low voltage may be detected. * Make sure laundry is not caught in the door.
S
Shawn TapiaAug 31, 2025
What to do if my Samsung WW11BB904AGBS2 is not draining and/or spinning?
- K
  Kevin RayAug 31, 2025
  If your Samsung washer isn't draining or spinning, consider the following: * Ensure the drain hose is fully straightened to the drain system. * Check the debris filter for clogs. * Close the door, then tap and hold to start. * Make sure the drain hose isn't frozen or clogged. * Verify the drain hose is connected to an unblocked drain system. * Ensure the washing machine has sufficient power; insufficient power can temporarily halt draining or spinning. * Confirm the drain hose is correctly positioned for your connection type. * Clean the debris filter, as it may be clogged.
T
Timothy HayesSep 13, 2025
Why does a message appears on the display to alert that dispenser is open on my Samsung WW11BB904AGBS2?
- M
  Megan DelgadoSep 13, 2025
  If a message appears on the display of your Samsung washer alerting that the dispenser is open, check if the detergent drawer is closed properly. Try opening the detergent drawer and closing it again.
B
Brittney BrownAug 27, 2025
How to fix a Samsung WW11BB904AGBS2 that leaks water?
- B
  brodriguezAug 28, 2025
  If your Samsung Washer is leaking water, check these items: * Ensure the door is fully closed. * Make sure all hose connections are tightened. * Verify the drain hose end is correctly inserted and secured to the drain system.