How to fix a Samsung WW11BB904AGBS2 that leaks water?
If your Samsung Washer is leaking water, check these items: * Ensure the door is fully closed. * Make sure all hose connections are tightened. * Verify the drain hose end is correctly inserted and secured to the drain system.
How to eliminate odors in Samsung WW11BB904AGBS2?
If your Samsung Washer has odours, excessive suds may be collecting in recesses. Run cleansing cycles periodically to sanitize it. Clean the door seal (diaphragm) and dry the washing machine interior after each cycle.
How to fix a Samsung WW11BB904AGBS2 Washer that does not start?
If your Samsung Washer doesn't start, try these steps: First, ensure the washer is properly plugged into a working outlet. Next, confirm that the door is completely closed and that no laundry is caught in the door. Also, check that the water taps are fully open. You may need to tap and hold the start button to initiate the cycle. Verify that the Child Lock feature is not activated. Also, before the washing machine starts to fill, it will make a series of clicking noises to check the door lock and will do quick drain. Inspect the fuse or reset the circuit breaker. Check if power is supplied properly and that the power cord is securely plugged in, addressing potential low voltage issues.
What to do if my Samsung WW11BB904AGBS2 does not drain and/ or spin?
If your Samsung Washer isn't draining or spinning, make sure the drain hose is straight and not clogged. Check the debris filter for clogs. Close the door and press Start/Pause. Ensure the drain hose isn't frozen and is properly connected to an unclogged drain system. Insufficient power or unevenly spread laundry can also cause this issue. Make sure the washing machine is on a flat, stable surface and redistribute the load if necessary.
Why is my Samsung Washer leaking water?
If your Samsung Washer leaks water, make sure the door is properly closed and all hose connections are tight. Ensure the drain hose is correctly inserted and secured to the drain system. Avoid overloading the machine and use high-efficiency (HE) detergent to prevent excessive suds. Also, check for obstructions between the door and the diaphragm.
What does 'Close the washer door and try again' mean on Samsung Washer?
The message 'Close the washer door and try again' on your Samsung washer means the machine is operating with the door open. Make sure the door is properly closed and that no laundry is caught in the door.
Why is my Samsung WW11BB904AGBS2 Washer filling with the wrong water temperature?
If your Samsung Washer is filling with the wrong water temperature, try these steps: * Fully open both taps. * Make sure the temperature selection is correct. * Ensure hoses are connected to the correct taps. * Flush water lines. * Make sure the water heater is set to supply a minimum 120 °F (49 °C) hot water at the tap. * Disconnect the hoses and clean the mesh filter.
Why is there detergent remaining in the detergent drawer of my Samsung Washer?
If detergent remains in the drawer of your Samsung washer after a cycle, ensure the washing machine is running with sufficient water pressure. Make sure the detergent is added to the center of the detergent drawer and that the rinse cap is properly inserted. If using granular detergent, make sure the detergent selector is in the upper position. You may also need to remove the rinse cap and clean the detergent drawer.
Why won't my Samsung WW11BB904AGBS2 start?
If your Samsung washer isn't starting, here are a few things to check: * Ensure the washing machine is plugged in. * Make sure the door is properly closed. * Verify the water taps are open. * Tap and hold to start the washing machine. * Confirm Child Lock is not activated. * Check the fuse or reset the circuit breaker. * Ensure power is supplied properly. * Check if the power cord is plugged in, as low voltage may be detected. * Make sure laundry is not caught in the door.
What to do if my Samsung WW11BB904AGBS2 is not draining and/or spinning?
If your Samsung washer isn't draining or spinning, consider the following: * Ensure the drain hose is fully straightened to the drain system. * Check the debris filter for clogs. * Close the door, then tap and hold to start. * Make sure the drain hose isn't frozen or clogged. * Verify the drain hose is connected to an unblocked drain system. * Ensure the washing machine has sufficient power; insufficient power can temporarily halt draining or spinning. * Confirm the drain hose is correctly positioned for your connection type. * Clean the debris filter, as it may be clogged.
To Next Page
General