What to do if Samsung WW12T water supply is insufficient?
If your Samsung Washer isn't getting enough water, start by fully opening the water tap. Ensure the door is properly closed. Check that the water supply hose isn't frozen, kinked, or clogged. Make sure there's sufficient water pressure and that the cold and hot water taps are correctly connected. Finally, clean the mesh filter, as it may be clogged.
Why won't my Samsung Washer start?
If your Samsung Washer doesn't start, first ensure it's properly plugged in and the door is completely closed. Also, check that the water taps are open and Child Lock is not activated. You may need to tap and hold to start the washing machine. Before filling, the machine clicks and does a quick drain to check the door lock. Verify the fuse or circuit breaker and ensure proper power supply. If a 'Low voltage detected' message appears, check the power cord. Make sure no laundry is caught in the door. For AddWash models, close the AddWash door properly and tap and hold to start or resume operation.
Why Samsung Washer does not start?
Your Samsung washer might not start for several reasons. Ensure it's plugged in, the door is properly closed, and the water taps are open. Tap and hold the start button. Check that Child Lock isn't activated. The washer clicks and does a quick drain before filling. Also, check the fuse or circuit breaker and ensure proper power supply. If the “DDC” message appears, close the AddWash door properly and tap and hold the start button again.
Why Samsung WW12T Washer fills with the wrong water temperature?
If your Samsung washer is filling with the wrong water temperature, fully open both taps and ensure the temperature selection is correct. Verify the hoses are connected to the correct taps and flush the water lines. The water heater should supply a minimum of 49 °C hot water. Also, disconnect the hoses and clean the mesh filter. Note that the water temperature may change during filling as the automatic temperature control feature checks the incoming water temperature.
Why is my Samsung Washer filling with the wrong water temperature?
If your Samsung washer is filling with the wrong water temperature: * Fully open both water taps. * Ensure the temperature selection is correct. * Make sure the hoses are connected to the correct taps and flush the water lines. * Check that the water heater is set to supply a minimum of 49 °C hot water. * Clean the mesh filter in the hoses. * Note that the water temperature may change during filling as the automatic temperature control feature checks the incoming water temperature.
Why is my Samsung WW12T vibrating excessively or making noise?
Excessive vibration or noise in your Samsung washer could be due to: * The washer not being on a level, solid floor. Adjust the levelling feet if needed. * Shipping bolts not being removed. * The washer touching another object. * An unbalanced laundry load. Redistribute the load if necessary. * Also, metal objects like coins can cause noise; remove them from the drum or filter case.
What to do if the Samsung Washer door does not open?
If the door on your Samsung washer won't open: * Press and hold the start button to stop the washing machine. * Wait a few moments for the door lock to disengage. * Note that the door will not open until 3 minutes after the washer has stopped or the power has been turned off. * Ensure all water has drained from the drum. If water remains, drain the drum manually.
What does 'OC' mean on my Samsung WW12T Washer?
If your Samsung washer displays 'OC', it indicates that water has overflowed. Restart the washer after spinning. If the message persists, contact a local Samsung service centre.
Why is my Samsung WW12T Washer making so much noise?
Excessive vibrations or noise from your Samsung Washer can stem from several factors. First, ensure the washer is on a level, solid, and non-slippery floor, adjusting the leveling feet if needed. Verify that the shipping bolts have been removed. Make sure the washer isn't touching any other objects. An unbalanced laundry load can also cause this issue; redistribute the items. Normal motor operation, clothes with metallic decorations, or metal objects like coins may also generate noise. If only one or two items are being washed, this can cause unbalance.
How to fix a Samsung WW12T Washer that does not start?
If your Samsung Washer doesn't start, ensure it's properly plugged in, the door is fully closed, and the water taps are open. Press and hold the start button. Also, verify that Child Lock is deactivated and that no laundry is caught in the door. It's normal for the washer to make clicking noises and do a quick drain before filling. Check the fuse or circuit breaker and ensure proper power supply. For 'AddWash door is open' message, close the AddWash door properly and press and hold the start button.
To Next Page
General