Samsung WW12T Series User Manual

Samsung WW12T Series

68 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Washing Machine

User manual

WW1*T******/WW8*T******/WW7*T******

Untitled-14 1 2022-04-28  3:00:48

Table of Contents

Other manuals for Samsung WW12T Series

Instruction Manual84 pages

Questions and Answers:

A
Anita HendersonSep 10, 2025
Why Samsung WW12T Washer fills with the wrong water temperature?
- C
  Casey CarterSep 10, 2025
  If your Samsung washer is filling with the wrong water temperature, fully open both taps and ensure the temperature selection is correct. Verify the hoses are connected to the correct taps and flush the water lines. The water heater should supply a minimum of 49 °C hot water. Also, disconnect the hoses and clean the mesh filter. Note that the water temperature may change during filling as the automatic temperature control feature checks the incoming water temperature.
J
Jake RogersAug 28, 2025
What to do if Samsung Washer not filling with water?
- M
  Megan JacobsAug 29, 2025
  If your Samsung Washer isn't filling with water, consider these possible solutions: * Fully open the water tap. * Ensure the door is properly closed. * Check that the water supply hose isn't frozen, kinked, or clogged. * Verify sufficient water pressure. * Make sure the cold and hot water taps are correctly connected. * Clean the mesh filter, as it may be clogged.
J
Jessica TaylorAug 25, 2025
Why won't my Samsung Washer start?
- F
  franklin16Aug 25, 2025
  If your Samsung Washer doesn't start, first ensure it's properly plugged in and the door is completely closed. Also, check that the water taps are open and Child Lock is not activated. You may need to tap and hold to start the washing machine. Before filling, the machine clicks and does a quick drain to check the door lock. Verify the fuse or circuit breaker and ensure proper power supply. If a 'Low voltage detected' message appears, check the power cord. Make sure no laundry is caught in the door. For AddWash models, close the AddWash door properly and tap and hold to start or resume operation.
D
Daniel ThompsonAug 25, 2025
Why Samsung Washer does not start?
- M
  michael12Aug 26, 2025
  Your Samsung washer might not start for several reasons. Ensure it's plugged in, the door is properly closed, and the water taps are open. Tap and hold the start button. Check that Child Lock isn't activated. The washer clicks and does a quick drain before filling. Also, check the fuse or circuit breaker and ensure proper power supply. If the “DDC” message appears, close the AddWash door properly and tap and hold the start button again.
C
Cathy StevensAug 26, 2025
What to do if Samsung WW12T Washer does not drain and/or spin?
- L
  lhayesAug 26, 2025
  If your Samsung washer isn't draining or spinning, ensure the drain hose is straight and the debris filter isn't clogged. Close the door and tap and hold the start button. Make sure the drain hose isn't frozen or connected to a clogged drain system. Insufficient power can also cause this issue; the washer should resume normal operation once power is restored. Also, verify the drain hose is correctly positioned.
V
valenciakimberlyAug 26, 2025
What to do if Samsung Washer leaks water?
- E
  Emily LivingstonAug 26, 2025
  If your Samsung washer is leaking water, ensure the door is properly closed and all hose connections are tight. Make sure the drain hose is correctly inserted and secured to the drain system, and avoid overloading the machine. Using high efficiency (HE) detergent can also help prevent oversudsing, which can cause leaks. Check the drain hose to ensure it is not placed on the floor or clogged.
L
Lawrence EllisAug 26, 2025
What to do if Samsung WW12T door does not open?
- V
  Victor BoyerAug 26, 2025
  If the door of your Samsung washer won't open, tap and hold the start button to stop the machine. It may take a few moments for the door lock to disengage. The door will not open until 3 minutes after the washer has stopped or the power has been off. Ensure all water in the drum is drained and that the door lock light is off.
P
Paul WilsonAug 27, 2025
Why Samsung Washer water supply is insufficient, or no water is supplied?
- L
  Lucas SparksAug 27, 2025
  If your Samsung washer isn't getting enough water, fully open the water tap and ensure the door is properly closed. Check that the water supply hose isn't frozen, kinked, or clogged, and that there is sufficient water pressure. Make sure the cold and hot water taps are properly connected. You may also need to clean the mesh filter, as it could be clogged.
W
Wanda DillonAug 27, 2025
Why Samsung WW12T Washer stops?
- T
  Thomas AlexanderAug 27, 2025
  If your Samsung washer stops mid-cycle, ensure the power cord is plugged into a live electrical outlet and check the fuse or reset the circuit breaker. Close the door and tap and hold the start button. There may be a pause or soak period in the cycle, so wait briefly. Make sure the mesh filter of the water supply hose is not clogged. Insufficient power can also cause the washer to stop temporarily.
G
Grace BrooksAug 27, 2025
Why Samsung WW12T Washer excessive suds?
- G
  glennschmidtAug 27, 2025
  Excessive suds in your Samsung washer can be due to using the wrong type of detergent. Use the recommended types of detergent as appropriate, and opt for high efficiency (HE) detergent to prevent oversudsing. Reduce the detergent amount for soft water, small loads, or lightly soiled loads. Non-HE detergent is not recommended.

Samsung WW12T Series Specifications

General

Brand	Samsung
Model	WW12T Series
Category	Washer
Language	English

Related product manuals

Preview: Samsung WW10T754DBH

Samsung WW10T754DBH

Samsung WW10T734DBX

Samsung WW10T654DLE

Samsung WW10T684DLH

Samsung WW10T684DLN

Preview: Samsung WW11K8412OW

Samsung WW11K8412OW

Samsung WW1 M8 Series

Samsung WW1 T4 Series

Samsung WW1 CB Series

Samsung WW10T684DLH/S1

Samsung WW11BB744CGWS4

Samsung WW11BB904AGBS2