What to do if the Samsung WW11BB944AGBS2 Washer door does not open?
If your Samsung Washer door won't open, press Start/Pause to stop the washing machine. It may take a few moments for the door lock to disengage. Make sure all the water in the drum has drained and the door lock light is off.
How to prevent excessive suds in Samsung Washer?
To prevent excessive suds in your Samsung Washer, use the recommended types of detergent as appropriate, and choose high-efficiency (HE) detergent. Reduce the detergent amount for soft water, small loads, or lightly soiled loads.
Why won't my Samsung WW11BB944AGBS2 Washer start?
If your Samsung washer isn't starting, here are a few things to check: * Ensure the washing machine is plugged in. * Make sure the door is properly closed. * Verify the water taps are open. * Tap and hold to start the washing machine. * Confirm Child Lock is not activated. * Check the fuse or reset the circuit breaker. * Ensure power is supplied properly. * Check if the power cord is plugged in, as low voltage may be detected. * Make sure laundry is not caught in the door.
What to do if my Samsung WW11BB944AGBS2 is not draining and/or spinning?
If your Samsung washer isn't draining or spinning, consider the following: * Ensure the drain hose is fully straightened to the drain system. * Check the debris filter for clogs. * Close the door, then tap and hold to start. * Make sure the drain hose isn't frozen or clogged. * Verify the drain hose is connected to an unblocked drain system. * Ensure the washing machine has sufficient power; insufficient power can temporarily halt draining or spinning. * Confirm the drain hose is correctly positioned for your connection type. * Clean the debris filter, as it may be clogged.
Why won't the door of my Samsung Washer open?
If the door of your Samsung washer won't open: * Tap and hold to stop the washing machine. * Allow a few moments for the door lock mechanism to disengage. * Note that the door will not open until 3 minutes after the washing machine has stopped or the power has been turned off. * Make sure all the water in the drum is drained. * The door may not open if water remains in the drum. Drain the drum and open the door manually. * Make sure the door lock light is off.
Why does my Samsung WW11BB944AGBS2 Washer have excessive suds?
Excessive suds in your Samsung washer can be due to: * Using non-recommended types of detergent. * Not using high efficiency (HE) detergent. * Using too much detergent for soft water, small loads, or lightly soiled loads. * Using non-HE detergent.
What to do if Samsung Washer shows 'Redistribute unbalanced load and restart'?
The 'Redistribute unbalanced load and restart' message on your Samsung washer indicates that spinning is not working. To resolve this: * Ensure laundry is spread out evenly inside the drum. * Make sure the washing machine is placed on a flat, stable surface. * Redistribute the load, especially if washing only one item of clothing.
Why Samsung WW11BB944AGBS2 Washer water supply is insufficient, or no water is supplied?
If your Samsung washer's water supply is insufficient or non-existent: * Fully open the water tap. * Make sure the door is properly closed. * Ensure the water supply hose is not frozen, kinked, or clogged. * Verify there is sufficient water pressure. * Confirm that the cold and hot water taps are properly connected. * Clean the mesh filter, as it may be clogged.
What to do if Samsung WW11BB944AGBS2 Washer does not drain or spin?
If your Samsung Washer isn't draining or spinning, try the following: * Ensure the drain hose is fully straightened and not kinked at any point along its length to the drain system. * Check the debris filter for any clogs or obstructions that may be preventing proper drainage. * Make sure the door is securely closed, then press the Start/Pause button to resume the cycle. * Ensure the drain hose isn't frozen or clogged. * Verify that the drain hose is connected to a drain system that is free of clogs. * Ensure laundry is spread out evenly inside the machine. * Confirm the washing machine is sitting on a flat, stable surface. * Redistribute the load to balance it.
Why is there insufficient water supply to my Samsung WW11BB944AGBS2 Washer?
If your Samsung washer isn't getting enough water, be sure the water tap is fully open and the door is properly closed. Check that the water supply hose isn't frozen, kinked, or clogged. Also, ensure there's sufficient water pressure and that both the cold and hot water taps are properly connected. Clean the mesh filter, as it may be clogged.
To Next Page
General