Samsung WW22N6850QX/A2 Service Manual

52 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

WASHING MACHINE (DRUM) CONTENTS

SERVICE

Manual

WASHING MACHINE

DRUM TYPE

Basic Model : WW90M6

(WW6800M PROJECT)

Model Name : WW22N6850Q*

(WW6850N PROJECT)

Model Code : WW22N6850QX/A2

(WW6850N PROJECT)

1. Safety Instructions

2.FeaturesandSpecications

3. Disassembly and Reassembly

4. Troubleshooting

5. PCB Diagram

6. Wiring Diagram

7. Reference

WW22N6850NX-A2_SM.indb 1 2018/2/1 17:15:26

Other manuals for Samsung WW22N6850QX/A2

User Manual216 pages

Questions and Answers:

D
Daniel HarveyAug 13, 2025
What to do if my Samsung Washer has a water supply valve fault?
- B
  Brooke RossAug 13, 2025
  If your Samsung Washer has a water supply valve fault, check whether the water supply valve is clogged with foreign material. Also, inspect the water supply valve for disconnected wires and replace it if necessary. Verify that the warm water and rinse connectors are correctly connected. Inspect the PCB terminal from the drain hose to the detergent drawer. Ensure the water tap is fully opened and check for freezing during the winter. If the PBA relay operates abnormally, consider replacing the PBA.
D
Dennis MartinezAug 16, 2025
Why does my Samsung Washer have a drain pump fault?
- R
  rogerbirdAug 16, 2025
  A drain pump fault in your Samsung Washer may occur if the pump motor impeller is damaged internally or if foreign material is restraining its revolutions. Check the voltage supplied to ensure it is correct. The fault could also be due to freezing in the winter season or a clogged drain hose. Check the connections and look for disconnected wires. The water pump terminal might also be disconnected.
M
Melvin GreenAug 20, 2025
What to do if my Samsung WW22N6850QX/A2 has washing motor fault?
- A
  Adam OliverAug 20, 2025
  If your Samsung Washer shows a washing motor fault, first check the motor power connector terminal connections and contacts. Inspect whether the stator of the motor cover is damaged. Look for coil disconnections due to foreign material or if the motor is overloaded due to too much laundry. If the PBA control circuit is faulty, replace the PBA.
K
Katie ThompsonAug 25, 2025
How to fix a water level sensor fault in my Samsung Washer?
- C
  Christina JohnsAug 25, 2025
  To fix a water level sensor fault in your Samsung Washer, check the water level sensor terminal connections and contacts. If the water level sensor is faulty, replace it. Inspect the hose for clogs, folds, or disengagement. Also check the insertion part of the air hose for too much lubricant. If the error persists, replace the PBA.
T
Thomas MccormickAug 28, 2025
What to do if my Samsung WW22N6850QX/A2 Washer has a door switch fault?
- N
  nmartinezAug 28, 2025
  If your Samsung Washer has a door switch fault, check whether the door is open and close it. Check the main PBA door sensing circuit.
P
Patrick JonesAug 31, 2025
Why Samsung WW22N6850QX/A2 Washer shows Main PCB and Sub PCB Signal Detection fault?
- A
  Amber JohnstonAug 31, 2025
  If your Samsung Washer shows a Main PCB and Sub PCB Signal Detection fault, it may be due to a communications error causing the signals between the sub and main PBAs not to be sensed. Check the wire connections and terminal contacts between the sub and main PBAs. Also, check the connector connections between the sub and main PBAs carefully. Remove the sub PBA C/Panel and check for any faulty soldering.
J
John MyersSep 4, 2025
How to troubleshoot a temperature sensor fault in a Samsung WW22N6850QX/A2 Washer?
- J
  James RyanSep 4, 2025
  To troubleshoot a temperature sensor fault in your Samsung Washer, check the connections for the washing heater temperature sensor connector. If the washing heater temperature sensor has a functional error, replace it.
O
Oscar CortezSep 8, 2025
What causes a washing heater fault in a Samsung Washer?
- T
  Thomas GarciaSep 8, 2025
  A washing heater fault in your Samsung Washer can be caused by a short-circuited washing heater or a disconnected wire. It may also be due to an error in the washing heater in the tub, such as a contact error or temperature sensor fault. In any of these cases, replace the washing heater.

Samsung WW22N6850QX/A2 Specifications

General

Washer Type	Front Load
Spin Speed	1400 RPM
Color	Black Stainless Steel
Steam Wash	Yes
Inverter Motor	Yes
Digital Inverter Technology	Yes
EcoBubble	Yes
Quick Wash	Yes
Child Lock	Yes
Delay Start	Yes
Smart Features	Wi-Fi

Related product manuals

Preview: Samsung WW22N6850QX

Samsung WW22N6850QX

Preview: Samsung WW22K6800AW

Samsung WW22K6800AW

Samsung WW22K6800A series

Samsung WW25B6900AW

Preview: Samsung WW25B6800AW/AC

Samsung WW25B6800AW/AC

Preview: Samsung WW25B6900 Series

Samsung WW25B6900 Series

Preview: Samsung WW90M6

Samsung WW90T684DLH

Samsung WW10T684DLN

Samsung WW80T4040CE

Samsung WW90T534DAW

Samsung WW70T4040EE