How to fix a Samsung WW25B6800AW/AC that does not start?
If your Samsung Washer doesn't start, ensure it's properly plugged in, the door is completely closed, and the water faucets are open. Press the Start/Pause button. Also, verify that the Child Lock feature is deactivated. The washer clicks and does a quick drain before filling, and check the fuse or reset the circuit breaker.
What to do if my Samsung Washer does not drain and/or spin?
If your Samsung Washer isn't draining or spinning, check the drain hose for kinks or obstructions. Ensure the debris filter isn't clogged. Close the door and press Start/Pause. Make sure the drain hose isn't frozen and is connected to an unclogged drain system. Also, ensure the drain hose is inserted 6 to 8 inches inside the drain pipe and that the washer is level. If the washer temporarily lacks sufficient power, it will resume normal operation once power is restored.
Why is my Samsung WW25B6800AW/AC Washer leaking water?
If your Samsung Washer is leaking water, make sure the door is properly closed and all hose connections are tight. Ensure the drain hose end is correctly inserted and secured to the drain system. Avoid overloading the washer and use high-efficiency (HE) detergent to prevent excessive suds.
What to do if the Samsung WW25B6800AW/AC Washer door does not open?
If the door of your Samsung Washer won't open, press Start/Pause to stop the washer, and allow a few moments for the door lock to disengage. Ensure all water is drained from the drum. The door lock light should be off after draining. If paused after water supply, wait one minute. If draining occurs followed by an information code, wait 3 minutes after stopping or power off. If unplugged during operation, plug in, turn on, deactivate Child Lock if needed, and press and hold Start/Pause to stop.
Why is there no water coming into my Samsung WW25B6800AW/AC?
If your Samsung Washer has insufficient or no water supply, fully open the faucet and make sure the door is properly closed. Ensure the water supply hose isn't frozen, kinked, or clogged. Also, verify sufficient water pressure.
How to reduce excessive suds in my Samsung WW25B6800AW/AC?
If your Samsung Washer has excessive suds, use the recommended types and amounts of detergent, and opt for high-efficiency (HE) detergent. Reduce the detergent amount for soft water, small loads, or lightly soiled loads. Avoid using non-HE detergent.
Why is my laundry still wet after a Samsung WW25B6800AW/AC Washer cycle?
If your laundry load is still wet after a cycle in your Samsung Washer, use the High or Extra High spin speed and high-efficiency (HE) detergent to reduce oversudsing. Small loads may become unbalanced and not spin completely. Ensure the drain hose isn't kinked or clogged.
How to get rid of odors in my Samsung Washer?
If your Samsung Washer has odors, excessive suds may be collecting in recesses. Run cleansing cycles periodically to sanitize, clean the door seal (diaphragm), and dry the washer interior after each cycle.
Why does detergent remain in the drawer of my Samsung WW25B6800AW/AC after a cycle?
If detergent remains in the detergent drawer of your Samsung Washer after a cycle, ensure the washer is running with sufficient water pressure. Add liquid detergent to the liquid detergent container, removing the container if using powdered detergent. Clean the detergent drawer.
Why is my Samsung WW25B6800AW/AC vibrating so much and making noise?
Excessive vibrations or noise in your Samsung Washer can be due to several reasons. Ensure the washer is on a level, solid, non-slippery floor, adjusting the leveling feet if needed. Remove the shipping bolts if you haven't already. Make sure the washer isn't touching anything else. Balance the laundry load. Note that the motor can make noise during normal operation, and metal objects like coins or metal-decorated clothes can also cause noise. Remove fillings from pillows and cushions, washing only the covers.
Read this manual thoroughly to ensure safe and efficient operation. Store it in a safe location.
Explains the meaning of warning, caution, and note symbols used in the manual.
Basic precautions to reduce risk of fire, electric shock, or injury, including warnings about flammable substances and children.
Warnings for qualified technicians regarding electrical connections, grounding, and appliance placement.
Cautions regarding power plug accessibility and proper floor installation for safety.
Warnings for appliance flooding, touching plugs with wet hands, and unusual noises or smoke.
Precautions for foreign substances, door operation, water leaks, and ensuring proper hose connections.
Warnings about cleaning agents, water spraying, and unplugging before maintenance.
Requirements for power connection, grounding, and circuit breaker for safe operation.
Proper water pressure, tap accessibility, and leak prevention for the washer.
Recommendations for drain standpipe, solid flooring, water temperature, and installation clearances.
Minimum clearance requirements for stable operation in confined spaces.
Simple steps to turn on the washer, select and change wash cycles during operation.
Explanation of all buttons and display elements on the control panel for managing wash cycles and features.
Steps to take if the washer freezes due to low temperatures.
Instructions for cleaning the washer's exterior panel and cabinet, and its interior.
Actions for when the washer does not power on, start, or stops unexpectedly during operation.
Diagnosing problems related to insufficient or no water supply.
Checks for detergent residue and causes of excessive vibrations or noise.
Troubleshooting for issues where the washer does not drain or spin correctly.
Resolving problems where the washer door fails to open after a cycle.
Causes and solutions for excessive foam generation during washing.
Addressing problems with adding detergent and water filling at the wrong temperature.
Troubleshooting why the laundry remains wet at the end of a wash cycle.
Resolving water leaks from the washer and addressing persistent odors.
Troubleshooting when the washer remains on or the door does not open post-cycle.
Details on parts and labor warranty, exclusions, and service procedures for U.S. customers.
Defines Samsung's liability and customer remedies under the U.S. warranty.
Details on warranty for parts, labor, motor, and exclusions for Canadian customers.
Explains limitations of liability and remedies for Canadian warranty claims.
General| Washer Type | Front Load |
|---|---|
| Color | White |
| Energy Efficiency | A+++ |
| Spin Speed | 1400 RPM |
| Dimensions (W x H x D) | 600 x 850 x 600 mm |
| Digital Inverter Motor | Yes |
| Eco Bubble Technology | Yes |
| Quick Wash | Yes |
| Delay Start | Yes |
| Child Lock | Yes |
To Next Page