To Next Page
P
peter08Aug 7, 2025
Why does my Samsung WW90T534DAN show an unbalance error?
- GghendrixAug 8, 2025
The unbalance error on your Samsung Washer is caused by the laundry load. Check the laundry to resolve this issue, as this occurs by laundry.
Why does my Samsung WW90T534DAN show an unbalance error?
The unbalance error on your Samsung Washer is caused by the laundry load. Check the laundry to resolve this issue, as this occurs by laundry.
Why is there no water supply in my Samsung WW90T534DAN Washer?
If your Samsung Washer isn't getting water, it could be due to several reasons. Foreign material may be entering the water supply valve, or the water supply valve terminal might not be connected properly. The warm water and rinse connectors could be wrongly connected. Also, check if the PCB terminal from the drain hose to the detergent drawer is not connected, or if the transparent hose is folded or torn. Low water pressure, or a frozen water valve in winter, can also cause this issue. In this case, the water supply valve may be faulty.
Why does my Samsung WW90T534DAN Washer overflow?
Your Samsung Washer may be overflowing due to a few potential issues. It could be that water is supplied continually because the water level detection isn't working, possibly due to a clogged drain hose or an injection error. Freezing or foreign material in the water supply valve can also cause continuous water supply. A faulty sensor, or a blocked or damaged pressure tube might also be responsible. All these scenarios can be related to a water level sensor fault.
Why is the water level wrong in my Samsung WW90T534DAN Washer?
If the water level in your Samsung Washer is incorrect, it could be due to several reasons. The hose where the water level sensor is located might be damaged, clogged with foreign material, or folded. Too much lubricant on the air hose insertion part, a hose engagement error, a part fault (like faulty internal soldering), a disengaged water level sensor terminal, or a main PBA fault can also cause this. These issues point to a water level sensor fault.
Why is my Samsung WW90T534DAN heater not working?
If the heater in your Samsung Washer isn't working, it could be due to a short-circuited washing heater or a disconnected wire. There might be a contact error or temperature sensor fault in the washing heater inside the tub. Also, if the water level sensor operates without water (due to frozen water or another reason) and the temperature sensor detects a high temperature (100 to 150 ?C), the washing machine will turn off the input power. This suggests a heater fault.
What causes communication errors in a Samsung WW90T534DAN?
Communication errors in your Samsung Washer can occur if the signals between the sub and main PBAs are not sensed. Check the connector connections between the sub and main PBAs carefully and look for any faulty soldering after removing the sub PBA C/Panel. These issues may indicate a Main PCB and Sub PCB Signal Detection fault or a Main PCB and Sub PCB wire connection fault.
Important warnings and cautions for safe operation and servicing of the washing machine.
Specific safety guidelines to follow before, during, and after servicing the appliance.
Precautions to prevent electric shock, fire, and product damage during maintenance.
Visual guides and step-by-step instructions for disassembling major parts like the cover and drawer.
Explanation of information codes, their potential causes, and corrective actions for various errors.
General| Door type | Tempered glass |
|---|---|
| Drum type | Diamond Drum |
| Rim color | Black |
| Color name | Inox |
| Door color | Black, Transparent |
| Door hinge | Left |
| Motor type | Digital inverter |
| Control type | Rotary, Touch |
| Door opening | Side opening |
| Loading type | Front-load |
| Product color | Platinum, Silver |
| Illumination color | White |
| Appliance placement | Freestanding |
| Inverter technology | Yes |
| Drum capacity | 9 kg |
| Cycle time (max) | 228 min |
| Spin-drying class | B |
| Maximum spin speed | 1400 RPM |
| Noise level (spin) | 72 dB |
| Noise level (wash) | - dB |
| Delayed start timer | - |
| Number of washing programs | 25 |
| Cycle time (quick washing program) | 15 min |
| Energy efficiency scale | A to G |
| Power consumption (off) | 0.5 W |
| Water consumption per cycle | 50 L |
| Energy consumption washing per cycle | 0.494 kWh |
| Package depth | 660 mm |
| Package width | 670 mm |
| Package height | 890 mm |
| Package weight | 69000 g |
Weight and Dimensions| Depth | 550 mm |
|---|---|
| Width | 600 mm |
| Height | 850 mm |
| Weight | 67000 g |
