To Next Page
A
Angela BrownAug 8, 2025
Why does my Samsung WW90TA046AX show an unbalance error?
- MmhowardAug 8, 2025
The unbalance error on your Samsung Washer is caused by the laundry load. Check the laundry to resolve this issue, as this occurs by laundry.
Why does my Samsung WW90TA046AX show an unbalance error?
The unbalance error on your Samsung Washer is caused by the laundry load. Check the laundry to resolve this issue, as this occurs by laundry.
Why is there no water supply in my Samsung Washer?
If your Samsung Washer isn't getting water, it could be due to several reasons. Foreign material may be entering the water supply valve, or the water supply valve terminal might not be connected properly. The warm water and rinse connectors could be wrongly connected. Also, check if the PCB terminal from the drain hose to the detergent drawer is not connected, or if the transparent hose is folded or torn. Low water pressure, or a frozen water valve in winter, can also cause this issue. In this case, the water supply valve may be faulty.
Why does my Samsung Washer overflow?
Your Samsung Washer may be overflowing due to a few potential issues. It could be that water is supplied continually because the water level detection isn't working, possibly due to a clogged drain hose or an injection error. Freezing or foreign material in the water supply valve can also cause continuous water supply. A faulty sensor, or a blocked or damaged pressure tube might also be responsible. All these scenarios can be related to a water level sensor fault.
Why is the water level wrong in my Samsung Washer?
If the water level in your Samsung Washer is incorrect, it could be due to several reasons. The hose where the water level sensor is located might be damaged, clogged with foreign material, or folded. Too much lubricant on the air hose insertion part, a hose engagement error, a part fault (like faulty internal soldering), a disengaged water level sensor terminal, or a main PBA fault can also cause this. These issues point to a water level sensor fault.
Why is my Samsung WW90TA046AX heater not working?
If the heater in your Samsung Washer isn't working, it could be due to a short-circuited washing heater or a disconnected wire. There might be a contact error or temperature sensor fault in the washing heater inside the tub. Also, if the water level sensor operates without water (due to frozen water or another reason) and the temperature sensor detects a high temperature (100 to 150 ?C), the washing machine will turn off the input power. This suggests a heater fault.
What causes communication errors in a Samsung WW90TA046AX?
Communication errors in your Samsung Washer can occur if the signals between the sub and main PBAs are not sensed. Check the connector connections between the sub and main PBAs carefully and look for any faulty soldering after removing the sub PBA C/Panel. These issues may indicate a Main PCB and Sub PCB Signal Detection fault or a Main PCB and Sub PCB wire connection fault.
Provides critical safety instructions, warnings, and precautions for safe operation and maintenance.
Details technical specifications like dimensions, capacity, power, and spin speed for various models.
Compares key features and specifications across different washing machine models for easy selection.
Lists optional parts, their codes, and descriptions for enhancing washing machine functionality.
Lists the necessary tools required for performing disassembly and reassembly tasks on the washing machine.
Step-by-step visual guides and instructions for disassembling various components of the washing machine.
Explains error codes, their causes, and corrective actions for diagnosing and resolving washing machine issues.
Provides practical solutions for common washing machine problems such as vibration, no drain, or door issues.
Illustrates the fundamental wiring connections within the washing machine's electrical system.
Details the specific wiring configurations for washing machine models equipped with LED displays.
Presents the wiring schematic for washing machines featuring the advanced Q-Drive technology.
Explains the structure of the WW6000T model code, including features, region, and body details.
Defines key technical terms used throughout the service manual for clarity and understanding.
General| Door color | Black |
|---|---|
| Door hinge | Left |
| Motor type | Digital inverter |
| Control type | Buttons, Rotary |
| Display type | LED |
| Loading type | Front-load |
| Product color | Stainless steel |
| Appliance placement | Freestanding |
| Inverter technology | Yes |
| Drum capacity | 9 kg |
| Cycle time (max) | 228 min |
| AquaStop function | No |
| Spin-drying class | B |
| Maximum spin speed | 1400 RPM |
| Minimum spin speed | 400 RPM |
| Noise level (spin) | 72 dB |
| Noise level (wash) | - dB |
| Load balancing system | - |
| Number of washing programs | 14 |
| Maximum washing temperature | 90 °C |
| Energy efficiency scale | A to G |
| Water consumption per cycle | 50 L |
| Package depth | 660 mm |
| Package width | 670 mm |
| Package height | 890 mm |
| Package weight | 67000 g |
| Repairability index | 8.5 |
Weight and Dimensions| Depth | 550 mm |
|---|---|
| Width | 600 mm |
| Height | 850 mm |
| Weight | 65000 g |
