How to fix a Samsung WW25B6900 that does not start?
D
Douglas HarrisJul 30, 2025
If your Samsung Washer isn't starting, there are several things to check: First, ensure the washer is properly plugged into a working outlet and that power is supplied correctly. Then, verify that the door is completely closed and that no laundry is caught in the door. Also, confirm that Child Lock is not activated. Tap and hold to start the washer. Check the fuse or reset the circuit breaker. If the power cord is plugged in, but low voltage is detected, this could also be the reason. Before the washer starts to fill, it will make a series of clicking noises to check the door lock and will do quick drain.
D
Daniel HarrisAug 8, 2025
What to do if the Samsung WW25B6900 Washer has insufficient water supply?
R
Ryan JenningsAug 8, 2025
If your Samsung Washer isn't getting enough water, start by fully opening the water taps. Ensure that the water supply hose isn't frozen, kinked, or clogged. Also, confirm that there is sufficient water pressure. Verify that the cold and hot water taps are properly connected. Finally, clean the mesh filter, as it may be clogged. Make sure the door is properly closed.
P
phamterriAug 18, 2025
Why does detergent remain in the detergent drawer of my Samsung Washer after a cycle?
E
Eric RamosAug 18, 2025
If detergent remains in the drawer of your Samsung Washer after a cycle, ensure the washer is running with sufficient water pressure. Check that the detergent is added to the center of the drawer and that the rinse cap is inserted correctly. If you're using granular detergent, make sure the detergent selector is in the upper position. You may also need to remove the rinse cap and clean the detergent drawer.
To Next Page
General
