22 English
Installation
Installation
3. Open the water tap and check if there are
any leaks around the connection areas.
If there are water leaks, repeat the steps
above.
WARNING
If there is a water leak, stop operating the washing machine and disconnect from the electrical supply.
Then, contact a local Samsung service centre in case of a leak from the water hose, or contact a
plumbing technician in case of a leak from the water tap. Otherwise, this may cause electric shock.
CAUTION
Do not stretch the water hose by force. If the hose is too short, replace the hose with a longer, high-
pressure hose.
Connecting to a non-threaded water tap
1. Remove the adaptor (A) from the water hose
(B).
2. Use a Phillips screwdriver to loosen four
screws on the adaptor.
WW3000TM(SEC)_IM_Hongkong_8C104-000991_EN.indd 22 2022-05-02 11:29:41
To Next Page
Loading...
