Samsung WW80TA046AX - User Manual

Other manuals for Samsung WW80TA046AX

Questions and Answers

M
Michael HillAug 15, 2025
How to fix Samsung WW80TA046AX that does not start?
- S
  Sheila RiveraAug 15, 2025
  If your Samsung Washer doesn't start, there are several things to check: * Ensure the washer is plugged in. * Verify the door is completely closed. * Confirm the water taps are open. * Press the Start/Pause button. * Deactivate Child Lock if it's on. * Be aware that the washer clicks and does a quick drain before filling. * Check the fuse or reset the circuit breaker. * Ensure proper power supply and check the power cord. * Also, make sure no laundry is stuck in the door.
S
Stephanie MaxwellAug 18, 2025
Why does my Samsung Washer show an unbalance error?
- M
  Miss Heidi Torres MDAug 18, 2025
  The unbalance error on your Samsung Washer is caused by the laundry load. Check the laundry to resolve this issue, as this occurs by laundry.
C
clarkjamesAug 21, 2025
What to do if Samsung WW80TA046AX has insufficient water supply?
- A
  Albert JohnsonAug 22, 2025
  If your Samsung Washer isn't getting enough water or no water at all, here’s what you can do: * Make sure the water tap is fully open. * Ensure the door is properly closed. * Check that the water supply hose isn't frozen, kinked, or clogged. * Confirm there's sufficient water pressure. * Verify that the cold and hot water taps are correctly connected. * Clean the mesh filter, as it might be blocked.
A
Andrea GonzalezAug 25, 2025
Why is there no water supply in my Samsung Washer?
- C
  chavezmelissaAug 26, 2025
  If your Samsung Washer isn't getting water, it could be due to several reasons. Foreign material may be entering the water supply valve, or the water supply valve terminal might not be connected properly. The warm water and rinse connectors could be wrongly connected. Also, check if the PCB terminal from the drain hose to the detergent drawer is not connected, or if the transparent hose is folded or torn. Low water pressure, or a frozen water valve in winter, can also cause this issue. In this case, the water supply valve may be faulty.
S
Sandra BaxterAug 28, 2025
Why does my Samsung WW80TA046AX Washer overflow?
- D
  Daniel MyersAug 28, 2025
  Your Samsung Washer may be overflowing due to a few potential issues. It could be that water is supplied continually because the water level detection isn't working, possibly due to a clogged drain hose or an injection error. Freezing or foreign material in the water supply valve can also cause continuous water supply. A faulty sensor, or a blocked or damaged pressure tube might also be responsible. All these scenarios can be related to a water level sensor fault.
C
Cynthia NortonAug 31, 2025
Why is the water level wrong in my Samsung WW80TA046AX Washer?
- L
  Levi GillSep 1, 2025
  If the water level in your Samsung Washer is incorrect, it could be due to several reasons. The hose where the water level sensor is located might be damaged, clogged with foreign material, or folded. Too much lubricant on the air hose insertion part, a hose engagement error, a part fault (like faulty internal soldering), a disengaged water level sensor terminal, or a main PBA fault can also cause this. These issues point to a water level sensor fault.
S
Sheila SalasSep 3, 2025
Why does detergent remain in the detergent drawer of my Samsung WW80TA046AX after a cycle?
- J
  James JonesSep 4, 2025
  If detergent remains in the drawer of your Samsung Washer after a cycle, consider the following: * Ensure the washing machine has sufficient water pressure. * Add detergent to the center of the drawer. * Make sure the rinse cap is properly inserted. * If using granular detergent, position the detergent selector correctly. * Clean the detergent drawer after removing the rinse cap.
T
tonyamcdonaldSep 7, 2025
Why is my Samsung WW80TA046AX Washer heater not working?
- M
  Maria HendersonSep 7, 2025
  If the heater in your Samsung Washer isn't working, it could be due to a short-circuited washing heater or a disconnected wire. There might be a contact error or temperature sensor fault in the washing heater inside the tub. Also, if the water level sensor operates without water (due to frozen water or another reason) and the temperature sensor detects a high temperature (100 to 150 ?C), the washing machine will turn off the input power. This suggests a heater fault.
B
burgessbriannaSep 12, 2025
What causes communication errors in a Samsung WW80TA046AX?
- P
  petersonlaurenSep 12, 2025
  Communication errors in your Samsung Washer can occur if the signals between the sub and main PBAs are not sensed. Check the connector connections between the sub and main PBAs carefully and look for any faulty soldering after removing the sub PBA C/Panel. These issues may indicate a Main PCB and Sub PCB Signal Detection fault or a Main PCB and Sub PCB wire connection fault.

Samsung WW80TA046AX Specifications

General

Door color	Black
Door hinge	Left
Motor type	Digital inverter
Control type	Buttons, Rotary
Display type	LED
Loading type	Front-load
Product color	Platinum
Appliance placement	Freestanding
Inverter technology	Yes
Drum capacity	8 kg
Maximum spin speed	1400 RPM
Minimum spin speed	400 RPM
Noise level (wash)	- dB
Number of washing programs	14
Maximum washing temperature	90 °C
Water consumption per cycle	- L