Why does my Samsung Washer fill with the wrong water temperature?
- GGail PetersonSep 10, 2025
If your Samsung Washer fills with the wrong water temperature, fully open both taps. Make sure the temperature selection is correct and the hoses are connected to the correct taps. Flush water lines. Ensure the water heater is set to supply a minimum 120 °F (49 °C) hot water at the tap and check its capacity and recovery rate. Disconnect the hoses and clean the mesh filter. Note that the water temperature may change as the automatic temperature control feature checks incoming water temperature, and you may notice just hot and/or just cold water going through the dispenser when cold or warm temperatures are selected.