Why does my Samsung WW80T654DLE/S7 Washer show an unbalance error?
The unbalance error on your Samsung Washer is caused by the laundry load. Check the laundry to resolve this issue, as this occurs by laundry.
How to fix a Samsung WW80T654DLE/S7 Washer that does not start?
If your Samsung Washer doesn't start, ensure it's properly plugged in, the door is fully closed, and the water taps are open. Press and hold the start button. Also, verify that Child Lock is deactivated and that no laundry is caught in the door. It's normal for the washer to make clicking noises and do a quick drain before filling. Check the fuse or circuit breaker and ensure proper power supply. For 'AddWash door is open' message, close the AddWash door properly and press and hold the start button.
Why Samsung WW80T654DLE/S7 cannot add additional detergent?
If you cannot add additional detergent to your Samsung washer, make sure the remaining amount of detergent and fabric softener is not over the limit.
Why does my Samsung WW80T654DLE/S7 Washer overflow?
Your Samsung Washer may be overflowing due to a few potential issues. It could be that water is supplied continually because the water level detection isn't working, possibly due to a clogged drain hose or an injection error. Freezing or foreign material in the water supply valve can also cause continuous water supply. A faulty sensor, or a blocked or damaged pressure tube might also be responsible. All these scenarios can be related to a water level sensor fault.
Why is my Samsung Washer vibrating excessively or making noise?
Excessive vibration or noise in your Samsung washer could be due to: * The washer not being on a level, solid floor. Adjust the levelling feet if needed. * Shipping bolts not being removed. * The washer touching another object. * An unbalanced laundry load. Redistribute the load if necessary. * Also, metal objects like coins can cause noise; remove them from the drum or filter case.
Why Samsung Washer fills with the wrong water temperature?
If your Samsung washer is filling with the wrong water temperature, fully open both taps and ensure the temperature selection is correct. Verify the hoses are connected to the correct taps and flush the water lines. The water heater should supply a minimum of 49 °C hot water. Also, disconnect the hoses and clean the mesh filter. Note that the water temperature may change during filling as the automatic temperature control feature checks the incoming water temperature.
What to do if Samsung WW80T654DLE/S7 Washer leaks water?
If your Samsung washer is leaking water, ensure the door is properly closed and all hose connections are tight. Make sure the drain hose is correctly inserted and secured to the drain system, and avoid overloading the machine. Using high efficiency (HE) detergent can also help prevent oversudsing, which can cause leaks. Check the drain hose to ensure it is not placed on the floor or clogged.
What to do if Samsung WW80T654DLE/S7 does not drain and/or spin?
If your Samsung washer isn't draining or spinning, ensure the drain hose is straight and the debris filter isn't clogged. Close the door and tap and hold the start button. Make sure the drain hose isn't frozen or connected to a clogged drain system. Insufficient power can also cause this issue; the washer should resume normal operation once power is restored. Also, verify the drain hose is correctly positioned.
Why Samsung Washer does not start?
Your Samsung washer might not start for several reasons. Ensure it's plugged in, the door is properly closed, and the water taps are open. Tap and hold the start button. Check that Child Lock isn't activated. The washer clicks and does a quick drain before filling. Also, check the fuse or circuit breaker and ensure proper power supply. If the “DDC” message appears, close the AddWash door properly and tap and hold the start button again.
What to do if Samsung WW80T654DLE/S7 water supply is insufficient?
If your Samsung Washer isn't getting enough water, start by fully opening the water tap. Ensure the door is properly closed. Check that the water supply hose isn't frozen, kinked, or clogged. Make sure there's sufficient water pressure and that the cold and hot water taps are correctly connected. Finally, clean the mesh filter, as it may be clogged.
To Next Page
General