To Next PageTo Next PageWhy does my Samsung WW80TA046AE Washer show an unbalance error?
The unbalance error on your Samsung Washer is caused by the laundry load. Check the laundry to resolve this issue, as this occurs by laundry.
How to fix a Samsung WW80TA046AE that does not start?
If your Samsung Washer isn't starting, here are a few things to check: * Ensure the washing machine is properly plugged in. * Verify that the door is completely closed. * Confirm that the water taps are fully open. * Press the Start/Pause button to initiate the cycle. * Deactivate Child Lock if it's enabled. * Be aware that the washer makes clicking noises and does a quick drain before filling. * Examine the fuse or reset the circuit breaker.
Why is my Samsung Washer vibrating excessively and making noise?
If you notice excessive vibrations or noise coming from your Samsung Washer, here are some potential causes and solutions: * Ensure the washer is on a level, solid, and non-slippery floor. Adjust the leveling feet if needed. * Verify that the shipping bolts have been removed. * Make sure the washer isn't touching any other objects. * Check that the laundry load is balanced. * Be aware that the motor can cause noise during normal operation. Also, overalls or metal-decorated clothes and metal objects like coins can cause noise during washing.
Why is there no water supply in my Samsung WW80TA046AE Washer?
If your Samsung Washer isn't getting water, it could be due to several reasons. Foreign material may be entering the water supply valve, or the water supply valve terminal might not be connected properly. The warm water and rinse connectors could be wrongly connected. Also, check if the PCB terminal from the drain hose to the detergent drawer is not connected, or if the transparent hose is folded or torn. Low water pressure, or a frozen water valve in winter, can also cause this issue. In this case, the water supply valve may be faulty.
Why does my Samsung WW80TA046AE overflow?
Your Samsung Washer may be overflowing due to a few potential issues. It could be that water is supplied continually because the water level detection isn't working, possibly due to a clogged drain hose or an injection error. Freezing or foreign material in the water supply valve can also cause continuous water supply. A faulty sensor, or a blocked or damaged pressure tube might also be responsible. All these scenarios can be related to a water level sensor fault.
Why is the water level wrong in my Samsung WW80TA046AE Washer?
If the water level in your Samsung Washer is incorrect, it could be due to several reasons. The hose where the water level sensor is located might be damaged, clogged with foreign material, or folded. Too much lubricant on the air hose insertion part, a hose engagement error, a part fault (like faulty internal soldering), a disengaged water level sensor terminal, or a main PBA fault can also cause this. These issues point to a water level sensor fault.
What to do if Samsung WW80TA046AE has insufficient water supply?
If your Samsung Washer isn't getting enough water, consider the following: * Make sure the water tap is fully open. * Ensure the door is properly closed. * Check that the water supply hose isn't frozen, kinked, or clogged. * Confirm that there's sufficient water pressure.
Why is my Samsung WW80TA046AE heater not working?
If the heater in your Samsung Washer isn't working, it could be due to a short-circuited washing heater or a disconnected wire. There might be a contact error or temperature sensor fault in the washing heater inside the tub. Also, if the water level sensor operates without water (due to frozen water or another reason) and the temperature sensor detects a high temperature (100 to 150 ?C), the washing machine will turn off the input power. This suggests a heater fault.
What causes communication errors in a Samsung Washer?
Communication errors in your Samsung Washer can occur if the signals between the sub and main PBAs are not sensed. Check the connector connections between the sub and main PBAs carefully and look for any faulty soldering after removing the sub PBA C/Panel. These issues may indicate a Main PCB and Sub PCB Signal Detection fault or a Main PCB and Sub PCB wire connection fault.
What to do if detergent remains in the detergent drawer after cycle in Samsung WW80TA046AE?
If detergent remains in the detergent drawer of your Samsung Washer after a cycle, consider these points: * Ensure the washing machine is running with sufficient water pressure. * Add detergent to the center of the detergent drawer. * Make sure the rinse cap is properly inserted. * If using granular detergent, position the detergent selector to the upper setting. * Try removing the rinse cap and cleaning the detergent drawer.
General| Door color | Black |
|---|---|
| Door hinge | Left |
| Water fill | Cold |
| Control type | Rotary, Touch |
| Display type | LED |
| Loading type | Front-load |
| Tub material | Plastic |
| Drum material | Stainless steel |
| Product color | White |
| Built-in display | Yes |
| Custom panel-ready | No |
| Illumination color | Blue |
| Appliance placement | Freestanding |
| Drum capacity | 8 kg |
| Cycle time (max) | 314 min |
| Residual moisture | 44 % |
| Spin-drying class | B |
| Maximum spin speed | 1400 RPM |
| Minimum spin speed | 400 RPM |
| Noise level (spin) | 72 dB |
| Noise level (wash) | - dB |
| Delayed start timer | - |
| Number of washing programs | 14 |
| Cycle time (quick washing program) | 15 min |
| Energy efficiency scale | A to G |
| Energy consumption washing per cycle | 0.56 kWh |
| Annual water consumption washing | 8100 L |
| Package depth | 660 mm |
| Package width | 670 mm |
| Package height | 890 mm |
| Package weight | 67000 g |
Weight and Dimensions| Depth | 550 mm |
|---|---|
| Width | 600 mm |
| Height | 850 mm |
| Weight | 65000 g |
