24 English
Installation
Installation
CAUTION
Do not stretch the water hose by force. If the hose is too short, replace the hose with a
longer, high-pressure hose.
Connecting to a non-threaded water tap
A
B
1. Remove the adaptor (A) from the water
hose (B).
2. Use a Phillips screwdriver to loosen four
screws on the adaptor.
3. Hold the adaptor and turn part (C) in the
arrow direction to loosen it by 5 mm (*).
WW80TA046AX_04218C-00_EN.indd 24 2021/1/23 11:55:08
To Next Page
Loading...
