Wireless network setup
37
2. Using a Network-Connected Machine
5
If Select the Wireless Setup Method screen appears, select Using a
direct wireless connection and click Next.
Even if your computer is running Windows 7 or hight, you cannot use this
feature if your PC does not support wireless network. Set the wireless
network using a USB cable (see "Access point via USB cable" on page 32).
If below screen appears, press the (WPS) button from the control panel
within 2 minutes.
6
When the wireless network set up is completed, click Next.
7
Select the components to be installed.
8
After selecting the components, you can also change the printer driver
name, set the machine to be shared on the network, set the machine as
the default machine. Click Next.
9
Click Finish.
To Next Page
Loading...
