25
1. Introduction
Installing the driver locally
A locally connected machine is a machine directly attached to your computer
using the cable. If your machine is attached to a network, skip the following
steps below and go on to installing a network connected machine’s driver (see
"Installing driver over the network" on page 13).
• If you are a Mac, Linux, or Unix OS user, refer to the "Installation for Mac"
on page 4 or "Installation for Linux" on page 6 or "Installation for Linux"
on page 6
• The installation window in this User’s Guide may differ depending on the
machine and interface in use.
• Only use a USB cable no longer than 3 meters (118 inches).
To Next Page
Loading...
