Samsung Xpress M2675FN User Manual

165
2. Using a Network-Connected Machine
Wireless network setup
• Make sure your machine supports wireless networking. Wireless
networking may not be available depending on the model (see "Features
by model" on page 7).
• If the IPv6 network seems to not be working, set all the network settings
to the factory defaults and try again using Clear Setting.
12
Getting started
Understanding your network type
Typically, you can only have one connection between your computer and the
machine at a time.
Wireless network name and network password
Wireless networks require higher security, so when an access point is first set up,
a network name (SSID), the type of security used, and a Network Password are
created for the network. Ask your network administrator about this information
before proceeding with the machine installation.
Infrastructure mode
This is an environment generally used for homes and SOHOs
(Small Office/ Home Office). This mode uses an access point to
communicate with the wireless machine.
Ad hoc mode
This mode does not use an access point. The wireless
computer and wireless machine communicate directly.

Samsung Xpress M2675FN Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Duplex Printing	Manual
Connectivity	Hi-Speed USB 2.0, Ethernet 10/100 Base TX
Monthly Duty Cycle	Up to 12, 000 pages
ADF Capacity	40 sheets
Processor	600 MHz
Memory	128 MB
Fax Speed	33.6 Kbps
Display	2-line LCD
Weight	11.3 kg
Print Speed	Up to 26 ppm (pages per minute)
Input Capacity	250 sheets
Output Capacity	120-sheet face down
Scanner Type	Flatbed, ADF
Media Sizes Supported	A4, A5, B5, Legal, Letter, Executive
Scan Resolution	Up to 1200 x 1200 dpi
Print Resolution	Up to 4800 x 600 dpi