Samsung Xpress SL-M2835DW - Page 100

4.Troubleshooting
3)HorizontalBlackBand
Description:Darkofblurryhorizontalstripesoccurintheprintingperiodically.
CheckandcauseSolution
Badcontactsofthevoltageterminalstoimagingunit.CleaneachvoltageterminaloftheCharge,Developing
rollerandTransferroller.(removethetonerparticlesand
paperparticles)
Therollersofdevelopermaybestained.
•OPCDrum=75.4mm
•ChargeRoller=26.7mm
•DevelopingRoller=36.75mm
Replacethelasertonercartridgeorimagingunit.
4)BlackandWhitespot
Description:Darkorblurryblackspotsoccurperiodicallyintheprinting.
CheckandcauseSolution
Ifdarkorblurryblackspotsoccurperiodically,therollersin
theImagingunitmaybecontaminatedwithforeignmatte
orpaperparticles.
•OPCDrum=75.4mm
•ChargeRoller=26.7mm
•DevelopingRoller=36.75mm
CleaneachvoltageterminaloftheCharge,Developing
rollerandTransferroller.(removethetonerparticlesand
paperparticles)
Iffadedareasorvoidsoccurinablackimageatintervalsof
75.4mm,theOPCdrumsurfaceisdamaged.
Replacethelasertonercartridgeorimagingunit.
Ifablackimageispartiallybroken,thetransfervoltageis
abnormalorthetransferroller’slifehasexpired.
•Ifthetransferroller’slifeisexpired,replaceit.
•Cleantheinsideofthesetagainstthepaperparticles
andforeignmatterinordernottocausethetrouble.
4-38Copyright©1995-2013SAMSUNG.Allrightsreserved.