Samwha DSP DSP-VIP-PL - Technical Specification; Line Voltage and Range Settings; Current and Ground Protection Specs

Short/Available for Type 10
O O
Ground Fault
O
O
Over temperature
O O
Indication
Line Voltage
O
O
Loaurent
O
3 Phase power
O
O
Power factor
O
O
KWH
O
O
Accumulated
working time
O O
Load factor
/Bar graph
O O
Auxiliary
Y-D Timer
O O
2 Level Alarm
O O
Forward-Reverse
O O
ON-OFF
X O
Man cntacor
Auto Close
O O
Communication
4~20mA
O O
RS 485,Modbus
X O X O
RS 232
O
O
Interface with Note PC
O O
6.Technical
Specification
Division
Description
Line Voltage
3 phase ,AC 100V ~ 600V,50/60Hz
Voltage setting
range
AC 110V
over:110V~150V ,under:70~110V
AC 220V
over:220V~290V ,under:150~220V
AC 380V
over:380~450V ,under:310~380V
AC 440V
over:440V~510V ,under:370~440V
AC 480V
over:480V~550V ,under:410~480V
Current setting
range
70 Type
0.2 ~ 70A/0.2KW ~52.4KW(AC 480V) /0.2 ~
6A(0.2KW~4.4KW/AC480V) with external CT
External CT
Refer Table
Ground protection
Zero Sequence
Current
30mA~10A
Time setting
Starting delay
time(dt)
OFF,0.1 ~300 sec/def, "OFF" selection means
inverse curve