Samwontech TEMI2700 - Page 10

SAMWONTECH
4st Edition of TEMI2000_Series IM : Aug. 18. 2009 Page 7 / 55
Ex.) How to input Set Point
▶ The following describes how to change Set Point 49.40 to 12.5.
→ Press the
button to pop up Numeric Input Keypad.
→ Press the numbers by the order (①→②→③→④→⑤). If setting is OK, press ENTER key(⑥).
①④ ⑥
②
③
⑤