Samyang Sony E mount - Program Preparation and Installation; Install Mono Runtime; Download and Run Lens Manager

11 pages

To Next Page

To Previous Page

4. Preparing to use the program

1) Mono must be installed to run the program.

• Download ( http://www.mono-project.com/download/ )

• Install Mono (MonoFramework-xxx.pkg)

2) If Mono installation is completed, please visit http://www.samyanglensglobal.com Download the

LensManager_Mac.zip file.

3) Unzip the Downloaded file and double-click the “LensManager.sh.command” file.

(Lens Station must be connected to PC before program execution)