S&C Instruction Sheet 663-590 3
Safety Information
Understanding
Safety-Alert
Messages
There are several types of safety-alert messages which may appear throughout this
instruction sheet as well as on labels and tags attached to the S&C Source-Transfer PMH
Pad-Mounted gear. Familiarize yourself with these types of messages and the importance
of the various signal words, as explained below.
DANGER
“DANGER” identifies the most serious and immediate hazards which will likely result in
serious personal injury or death if instructions, including recommended precautions, are
not followed.
WARNING
“WARNING” identifies hazards or unsafe practices which can result in serious personal
injury or death if instructions, including recommended precautions, are not followed.
CAUTION
“CAUTION” identifies hazards or unsafe practices which can result in minor
personal injury if instructions, including recommended recautions, are not followed.
N OTICE
“NOTICE” identifies important procedures or requirements that can result in product or
property damage if instructions are not followed.
Following
Safety Instructions
If you do not understand any portion of this instruction sheet and need assistance,
contact your nearest S&C Sales Office or S&C Authorized Distributor. Their tele-
phone numbers are listed on S&C’s website sandc.com. Or call the S&C Global Support and
Monitoring Center at 1-888-762-1100.
N OTICE
Read this instruction sheet thoroughly and
carefully before inspecting or maintaining your
S&C Source-Transfer PMH Pad-Mounted gear.
Replacement
Instructions and
Labels
If you need additional copies of this instruction sheet, contact your nearest S&C Sales Ofce,
S&C Authorized Distributor, S&C Head quarters, or S&C Electric Canada Ltd.
It is important that any missing, damaged, or faded labels on the equipment be replaced
immediately. Replacement labels are available by contacting your nearest S&C Sales Office,
S&C Authorized Distrib utor, S&C Headquarters, or S&C Electric Canada Ltd.
To Next Page
Loading...
Need help?
General
