CONNECT TO THE INTERNET
Your mobile device or computer can wirelessly access content on your Drive and at the
same time remain connected to the Internet as long as a wireless Internet network is
available. (Some wireless networks might block this functionality.)
1. Connect to your Wireless Drive and open the app.
2. Go to Settings > Internet Connection Mode and turn on Enable Internet Connection.
3. Select the desired network from the list of available networks.
4. Exit the app and change your mobile device Wi-Fi connection to the same network
selected in the app. You’re now connected to both the Wireless Drive and the Internet.
From now on, when you connect to this Internet network, it will automatically find the
Drive.
Note: Creating a Wi-Fi password allows you to limit access to your Drive when
connecting directly to it. But the W
i-Fi password does not limit access when your Drive is
connected to an Internet Wi-Fi network, where anyone who has installed the Wireless
Flash Drive app or knows the Wireless Drive URL can access your Drive.
HAVING TROUBLE?
THIS MIGHT HELP
• Download the latest Firmware from www.sandisk.com/support
• Make sure you’re wirelessly connected to the Wireless Drive.
• Make sure the Wireless Drive is fully charged.
• Force the app to close:
Wireless Flash Drive app for Android: Go to Settings > Applications > Manage
applications.
Wireless Flash Drive app for iOS: Double-press the Home button on your device, press
and hold down the app icon until the Close symbol appears, and close the app.
• If you’ve forgotten your security password, press the power button for 30 seconds
(until all the lights flash) to clear the password so you can set a new one.
To Next Page
Loading...
Need help?
General
