SanDisk G-DRIVE PROJECT - Inserting a PRO-BLADE SSD MAG; PRO-BLADE SSD MAG LED Behavior

LED Behavior Description Status
off, then the client device
wakes up.
On for 20 minutes G-DRIVE PROJECT is
connected to power, but not
to the client device.
Turns on initially but turns
off automatically after 20
minutes of inactivity.
Fast Blinking Rhythm G-DRIVE PROJECT is
connected to power and
a client device, and is
transferring data.
Faster Blinking Rhythm G-DRIVE PROJECT is
connected to a client device
and the temperature is above
the recommended threshold.
INSERTING A PRO-BLADE SSD MAG
To insert a PRO-BLADE SSD MAG into a compatible device, make sure the notched
corners on both devices are aligned with each other.
To insert a PRO-BLADE SSD MAG into the G-DRIVE PROJECT, follow these steps.
1. Align the PRO-BLADE SSD MAG to a slot on the G-DRIVE PROJECT.
2. Slide the PRO-BLADE SSD MAG into the G-DRIVE PROJECT slot until firmly
seated.
PRO-BLADE SSD MAG LED BEHAVIOR
The following table describes the various device LED behaviors for the
PRO-BLADE SSD Mag slot when a PRO-BLADE SSD Mag is inserted into a
G-DRIVE PROJECT.
Table 2:
LED Behavior Description Status
Off PRO-BLADE SSD Mag is not
inserted.
Off
On PRO-BLADE SSD Mag is
inserted, and the G-DRIVE
PROJECT is connected to
power.
On
Fast Blinking Rhythm Transferring data between
the PRO-BLADE SSD Mag and
G-DRIVE PROJECT.
Faster Blinking Rhythm PRO-BLADE SSD Mag is
connected to the G-DRIVE
Main Activities
SanDisk Professional
User Manual
6